Hi mate, I've just done a 996 to 986 cluster swap. Everything works well with the prog reprog but I need a bin file from an early pre '00 996 manual with OBC to get my OBC working. Somehow the programming is different to the Boxster and a dif from std to OBC Boxster doesn't work.
Good morning,
I am interested in plastic trim pieces and a few other odds and ends.
- Seat rail cover trim pieces
- Rollbar trim pieces
- Plastic fastners for frunk plastic trim and carpet.
- Plastic fastners for trunk carpet
- Did you have an amp? (I saw that the changer and radio were sold.)
- What I call "tails of the wire harness and connector ends" from the head unit, CD changer, and amp (so if you have the amp, can leave the connectors on the amp and just cut the wires 4 inches back?)
- I need the connectors and a few inches of the wires coming out of the sound system components to solder to my harness that had been cut by previous owner.
- the frunk light
- the trunk light
With the exception of the amp (if available) the rest of these pieces weigh very little and don't need much protection during shipping. Would $25 cover your time and freight?
