Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-18-2020, 05:44 PM   #1
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,446
Maytag's Trailer Hitch

Several of you over the last several months have asked me for details of how I built my trailer hitch. I keep forgetting to take photos when I've got the bumper-cover off. So this is the next best thing.

I started with this:



You can see how that went together. Worked great... until those aluminum tabs broke-off. After that it was just the pull-out of the bolts, and I didn't trust that at all. So I had to come up with a better idea.

So here's a spare rear bumper I had. Imagine it with those bumperette brackets gone.

I cut the red square out, front / rear. (sized correctly for the receiver, of course). I then moved the threaded insert for the tow-hook several inches to the side (that's the red line with a circle at the end).



Then I took some 1"x1"x3/16" angle, two pieces approximately 24" long, and put one on the bottom front and one on the top rear (faint blue lines) Then I welded them to the receiver. And then I thru-bolted them (down from the top, and up from the bottom) to the aluminum bumper.




So where's the weak-point now? The anchors for the bumper, to the body.

The real kicker on this is that you won't have access to the hole for the pin, so you have to have the fancy-schmancy draw-bar that locks from the front. I paid around $150-ish for mine, with a ball. as I recall. When I'm towing, I put the tow-hook into the tow-hook hole and attach my safety chain there.









Last edited by maytag; 02-18-2020 at 05:48 PM.
maytag is offline   Reply With Quote
Old 02-18-2020, 06:15 PM   #2
Registered User
 
Qingdao's Avatar
 
Join Date: Jul 2019
Location: Charleston
Posts: 509
Nice. Now weld a manual tire mounting post and an air compressor to the trailer and you'll be all set.
__________________
'99 supercharged 4.3 chevy Boxsterado
'98 PP13B powered thing

WTB: any cheap 986 shifter new or used
Qingdao is offline   Reply With Quote
Old 02-18-2020, 06:22 PM   #3
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,821
Thanks! I think I will pull the bumper on mine and take some measurements to get a good grasp on the fabrication. What holds your tow hook in? Is the removal of the bumperettes necessary or rather an aesthetic choice?
This should be a fun project and doesn’t appear too complicated. I’ll be sure to document it. It will make for a great new video for my channel!
__________________
James now has: 2008 987S 6 speed
Crashed: 2010 987.2 pdk in speed yellow!
Sold to a cool racer chick: 2004 986 S
YouTube channel: the PORSCHE as seen by NewArt
www.youtube.com/channel/UCohdrH2xHTklM1thxk0KKOQ?
NewArt is offline   Reply With Quote
Old 02-18-2020, 06:38 PM   #4
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,446
Quote:
Originally Posted by NewArt View Post
Thanks! I think I will pull the bumper on mine and take some measurements to get a good grasp on the fabrication. What holds your tow hook in? Is the removal of the bumperettes necessary or rather an aesthetic choice?
This should be a fun project and doesn’t appear too complicated. I’ll be sure to document it. It will make for a great new video for my channel!
When you get into it, you'll see that the two bolts hold a threaded insert in place, for the tow hook. So you'll drill three holes (2 for the bolts that hold the insert) and move that down.

If you can get that tow hook in place with the bumperettes still there, go for it. I wanted them gone anyway.

One thing I didn't detail, that you'll discover: the hinge on the license plate holder is VERY stiff. So much so, that when simply attached the same way the license plate was, it would just deform the plastic bumper cover. So I put a peice of steel strap on the inside / baack side, that the hinged holder bolts to.

You'll probably come up with something much cleaner.


Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 02-18-2020, 06:45 PM   #5
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,446
Quote:
Originally Posted by Qingdao View Post
Nice. Now weld a manual tire mounting post and an air compressor to the trailer and you'll be all set.
Ooohhhhh...... another project before spring!

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 02-19-2020, 05:12 AM   #6
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,143
Very cool! On my Boxster I took the bumper bar off and had those two bumperette tabs welded to the bumper bar for reinforcement, my tow bracket looks very similar to your first photo.

For the Cayman I want to do something like your new project. It looks great.
steved0x is offline   Reply With Quote
Old 02-19-2020, 10:57 AM   #7
Registered User
 
Nine8Six's Avatar
 
Join Date: Sep 2013
Location: Montreal, QC. (currently expat to Shanghai)
Posts: 3,249
Nice job! useful too, from the look of it!
__________________
______________________________
'97 Boxster base model 2.5L, Guards Red/Tan leather, with a new but old Alpine am/fm radio.
Nine8Six is offline   Reply With Quote
Old 02-19-2020, 03:18 PM   #8
Registered User
 
Join Date: Oct 2012
Location: Cincinnati, Ohio
Posts: 373
Garage
Exactly how I did mine.

Van914 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page