Porsche Wind Deflector with Edge Lighting [from CAD, prototyping to finish]

[Nine8Six]

Originally Posted by amagalla

It should be easy..ish. I assume your setup is one or 2 wires coming out. My thinking is that you'd need to add one more wire to support the red LEDs.

Tony

Tony - got those taken for you to see what's happening there. Wire-wise it's the safest/smallest I could come up with to supply the 12v to the single-color LED strip. Already small, 26AWG wires covered by a PVC insulation (OD3mm).

There's the kit... simpler than that is hard! Gave it my best shot anyway.

- Etched window (Porsche bracket not included)
- LED strip in color of choice + one spare
- LED modules/blades (CNC thingny, black, no Skybreaker logo no worries)
- PWM Controller (Brightness thingy)
- Lots lots lots of wire for you to cut lol
* NO CLIPs. Found out some retail those for as cheap as $5 these days :/ didn't know.... remember paying something like $60 incl shipping once for those clips





Made-in-China my friend. $9.95 (+ tax... about $7,855)