OBC Cable...is this fair ? - 986 Forum - The Community for Porsche Boxster & Cayman Owners

dbansal · 07-01-2014, 08:57 AM

to be clear this harness is good for both OBC and cruise control?

Pdwight · 07-01-2014, 09:21 AM

This is for OBC only, it will connect the stalk to the Instrument cluster with the correct connectors.

rdass623 · 07-01-2014, 07:25 PM

will you be making the harness for the economy mod using a dash mounted switch? fi you do, I would be interested in purchasing one. I have ordered a window switch in anticipation, and really am hoping it will not need to wait for me to figure out how to do it myself.

Pdwight · 07-01-2014, 10:18 PM

I will be happy to make a harness for this system, I do not have a good source for the switches...I will investigate further. Can you give me a length you would need ?

Thanks
Dwight

BruceH · 07-02-2014, 07:45 AM

Quote:

Originally Posted by rdass623

will you be making the harness for the economy mod using a dash mounted switch? fi you do, I would be interested in purchasing one. I have ordered a window switch in anticipation, and really am hoping it will not need to wait for me to figure out how to do it myself.

Quote:

Originally Posted by Pdwight

I will be happy to make a harness for this system, I do not have a good source for the switches...I will investigate further. Can you give me a length you would need ?

Thanks
Dwight

I would be more interested in the dash mounted switch harness too. Sourcing a stalk can be difficult, a switch not so much.

Pdwight · 07-02-2014, 08:04 AM

This would be from the back of the Instrument Cluster (Gray Plug) to the switch located on the left panel of switches in the center cluster right ?

I could include extra length of wire in case you needed to reroute the loom. This would be no problem. Would you want standard push on (Stakon) connectors for the switch (s) ?

eicheldp · 07-02-2014, 08:59 AM

Quote:

Originally Posted by Pdwight

This would be from the back of the Instrument Cluster (Gray Plug) to the switch located on the left panel of switches in the center cluster right ?

I could include extra length of wire in case you needed to reroute the loom. This would be no problem. Would you want standard push on (Stakon) connectors for the switch (s) ?

PD - Include one for me for the switch mount version.
Thanks