Yes, thinking of doing one. Did you do this out of a whole sheet of MDF?

I may tackle this next week. I have a custom fiberglass enclosure now behind the passenger seat, but I am not happy with it.

Besides, this will get me thinking about saw angles and stuff for a few days <g>.

Any chance that someone could post a set of the plans for this? The link is long dead....Thanks...

This, mounted in the passenger footwell. That wood enclosure is clunky and too large.

https://www.amazon.com/Kenwood-KSC-SW11-Compact-Enclosed-Subwoofer/dp/B00BO8O9XQ

Thanks....I have a Kicker one. Will try moving it from behind the passenger seat. D'oh! why didn't I think of this before?

Here are the original plans:

thanks Benjamin!

Interesting... Is there a reasons you went for that location and not the place behind the seats like the OEM Bose one, it was not lack of skills so i wonder!

On my sub i bought a bose footwell sub from a 911 cabriolet, fits along side the shift tunnel and doesn't take away leg room for the most part.

Modfied the enclosure used a pioneer thin 8” sub, the cut out i used to seal the hole where the bose driver was, put some polyfill in and sound dampening, had to trim the port tube a little, powered by the alpine sub channel in the frunk.

Lots of options if you get creative.

I had to google that one, nice too!

Thanks there is a guy who prefabs several types but really expensive. I can look for the link if your interested. I think the box no woofer was around $500 maybe more.