Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-19-2013, 06:59 PM   #4
Registered User
 
Join Date: Oct 2013
Location: NC
Posts: 8
Garage
Bumper holes?

@Homeboy981:

I've got a '04 Boxster S that I'm hooking a wireless backup camera to. Wireless in the sense that I still need to run the camera wire from the plate area and into the trunk. There's no wire to run to the front of the car... the signal goes over RF.

Can you tell me more about how you managed this without drilling a hole into the bumper cover? My cover only has the two factory plastic stand-offs into which a Porsche US plate frame can screw. The two screw holes are ~ 10" apart. Into that you screw the plate frame which then has 4 holes and into that you screw the US plate. So, just the 2 holes, and they are filled with two screws. :-(

The car is US spec in *some* ways, but not others. No little rubber bumpers, for example. I'm trying to keep the car stock, so no new head unit, and hopefully no new holes! :-)
FrugalGuy is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page