I am very sorry...I did link the wrong ones. I used the 250-380mcd LEDs.
Yikes. My apologies.
That's a lot of work to do twice, but at least they're cheap. I'll fix the link.
The headlight switch requires small standard(non-surface mount) LEDs as the are soldered to the rear of the board, not the surface. I had some in the parts bin that I used and don't have a part # for those, but any small 200-400mcd led would work. For the "ashtray" and lighter, I just picked up some full size LEDs from radio shack. On the lighter socket, I just removed all of the stock light hardware and directly soldered the negative leg of the led to the metal of the socket so that I could aim it at the diffuser and adjust it for optimum even light distribution. I'll see if I can get a picture soon.
Threaded Mode
