Installing aftermarket rear speakers

[BruceH]

Originally Posted by JayG

I'm looking at that sub as well
Let me know how it works for you

I would be curious about those subs as well.

[Hogosha]

Jay, A dealer not too far from me has several used one's, I will probably go pick one up this week.

[JayG]

Hogosha, are you planning to do an under seat install?

Also I found wiring info
http://www.scoobymods.com/showthread.php/oem-underseat-subwoofer-info-199.html?t=199

[Hogosha]

Originally Posted by JayG

Hogosha, are you planning to do an under seat install?

Also I found wiring info
http://www.scoobymods.com/showthread.php/oem-underseat-subwoofer-info-199.html?t=199

Jay,
Thanks for the link! It was an absolute pleasure chatting with you before! I also believe this will work, I am going to bite the bullet and order one. And yes, I am looking for an under seat install.

[DG Boxster]

I just finished the rear speaker install on my 98 986. I also changed the radio from the CDR-210 to the CDR-220 as well as the front speakers.

I used Polk DB-351s in the back (1 each side) and DB-401s in the front.

Nothing remarkable to report about the install except a few details.

I made speaker mounts out of 1/8" plywood from the hobby store, cut out with a dremel tool.

I made the grills from decorative aluminum sheet I found at Hobby Lobby. I trimmed it to fit, painted them black (along with the plywood). I held it all together with black E6000 glue. It came out great.

The hardest part was running the wires, along the ride side per the 101 projects book.

I did find the correct connector pins to go into the existing brown connector that plugs into the radio. Search for "ES#470511" on ECS tuning. They are only $0.99 each. By the way, ES#470510 is the same pin, but for smaller wire .

The pins are easy to crimp with a "Molex Open Barrelled Pin Crimper" like this.

Just wanted to put the part numbers out there for someone else.

BTW - the system sounds 1000% better than the stock paper speakers and CDR-210. I was going to do door speakers and an amp but I think this is good enough for me. I love the look of the CDR-220. Very retro Porsche. I like watching it light up "Porsche" when it turns on.

[dghii]

Hey Dave,
Glad you finally got "My" radio installed! I've still got the 6 channel amp if you ever decide to go that way.

[amagalla]

Here is the wiring diagram for the CDR23. If memory serves, the amp in the frunk only drives the dash speakers and door subs.