Headlamp washer nozzles

[JaxJim]

Originally Posted by ivectoru1

You don't have to pull assembly or anything. Make sure the empty nozzle ports are clean/dry then lightly prep with VERY small amount of pipe cement or krazy glue. Pre-aim the nozzles as you set them in the ports, because the'll set fast, and won't pop out again!

Perfect! Thanks much!

[embryoguy@mac.com]

so its just the little nozzle. i need to fill in the entire hole thru the corner piece.

[nicecar]

got the entire assembly from d.c.auto for free because I asked for them. Bought some other stuff as well but the guy said they have a bunch back there they throw alot away. I think one guy said 75 dollar min. order but they fired him. I asked the dealership about mine when purchased (brumos) some mechanic came out and told me bumper had to come off, subsequently working on the headlight found after removing headlight there it was. to remove front bumper 20 minutes maybe, very easy and lots of fun. You should read all the posts on here that start with Im no mechanic and end with how much fun and satisfying. As my redneck R.V. mech. says it aint the f***** space shuttle, however I do leave internals for the NASA boys