01-13-2008, 06:32 PM
|
#1
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
had my boxster towed tonight
This is my first time writing on here.. I hope I am doing it right..
Anyway, I have 1999 boxster with 46k. Everything seemed to be running great until tonight... I was taking off from a light and I heard a loud clunking sound and it continued as I pulled away. I pulled over and shut car off. I started the car up and it sounds fine.. Rev it up and sounds great.. NOT engine then right? I did not try to engage the clutch. scared to do damage. Had it towed away to dealer..
Does anyone have any idea what is wrong? My clutch has not been slipping at all! Clutch pedal has felt a little odd, but no slipping..
help please...
|
|
|
|
01-13-2008, 06:38 PM
|
#2
|
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
It could be many things, really. I'm sorry this happened to you. Fear of the unknown is lousy—I've had it many times with my Boxster.
Do come back to this thread and let us know what happened when a proper diagnosis has been made. You've now piqued my interest!
|
|
|
|
|
01-13-2008, 07:41 PM
|
#3
|
|
Registered User
Join Date: Sep 2006
Location: Los Angeles
Posts: 373
|
Engine light come on? Did it flash? That's kinda the first sign of something serious.
__________________
1995 Silverado V8 - Green/ Tan (FOR SALE)
2000 Boxster S - Ocean Blue/ Graphite Grey
2002 GSXR750 - Blue/White
http://www.darkoven.com/sig.jpg
|
|
|
|
|
01-13-2008, 08:10 PM
|
#4
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
the engine runs. i can start it and it sounds awsome. No engine light comes on at all or any other light.
|
|
|
|
|
01-13-2008, 08:20 PM
|
#5
|
|
Registered User
Join Date: Aug 2004
Location: Canada
Posts: 188
|
Might be something as simple as a failed drive axle, they do break in rare cases or the bolts come loose and fall out.
|
|
|
|
|
01-13-2008, 08:31 PM
|
#6
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
would that make a horrible sound when that fails?
|
|
|
|
|
01-14-2008, 04:10 AM
|
#7
|
|
Registered User
Join Date: Aug 2004
Location: Canada
Posts: 188
|
If the axle breaks near the splines for the C/V joint it won't make a sound and will look fine until torque is applied but they sometimes make a little noise if just the bolts fall out.
|
|
|
|
|
01-14-2008, 05:53 AM
|
#8
|
|
Registered User
Join Date: Nov 2006
Location: New York
Posts: 644
|
Sorry to hear about your ride. Good luck with that and keep us posted!
|
|
|
|
|
01-14-2008, 06:34 AM
|
#9
|
|
Porscheectomy
Join Date: Mar 2006
Location: Seattle Area
Posts: 3,011
|
Quote:
|
Originally Posted by wvicary
If the axle breaks near the splines for the C/V joint it won't make a sound and will look fine until torque is applied but they sometimes make a little noise if just the bolts fall out.
|
If you do loose a joint, the car wont move when you try to get it going. The noise mine made when the axle went was a loud clicking when you applied load to the transmission. Kind of like a very hard to listen to version of baseball cards in a bicycle wheel spoke. There wouldn't be any strange noise just still.
Last edited by blue2000s; 01-14-2008 at 06:37 AM.
|
|
|
|
|
01-14-2008, 07:09 AM
|
#10
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
Quote:
|
Originally Posted by blue2000s
If you do loose a joint, the car wont move when you try to get it going. The noise mine made when the axle went was a loud clicking when you applied load to the transmission. Kind of like a very hard to listen to version of baseball cards in a bicycle wheel spoke. There wouldn't be any strange noise just still.
|
it wasn't a clicking sound.. loud clunking sound and made the jerk back and forward... I started car and sounds good, but did not put it in gear. I am thinking transmission... maybe?
|
|
|
|
|
01-14-2008, 07:49 AM
|
#11
|
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
It certainly could be transmission-related. That or e-brake related? 
|
|
|
|
|
01-14-2008, 09:19 AM
|
#12
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
Failed axle drive. Good call wvicary! Yes, on the driver side the bolts were gone and it was just hanging there. Very happy this is all that is wrong 
How much does this cost?
|
|
|
|
|
01-14-2008, 09:35 AM
|
#13
|
|
Registered User
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
|
For the bolts, probably less than $50 bucks max for all of them for all of them. Lucky Mofo! 
|
|
|
|
|
01-14-2008, 10:02 AM
|
#14
|
|
Registered User
Join Date: Oct 2007
Location: royal oak, mi
Posts: 8
|
Quote:
|
Originally Posted by CJ_Boxster
For the bolts, probably less than $50 bucks max for all of them for all of them. Lucky Mofo! |
what if i need to replace the entire axle? best to worst case.
|
|
|
|
|
01-14-2008, 10:09 AM
|
#15
|
|
Registered User
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
|
Quote:
|
Originally Posted by cardesigner
what if i need to replace the entire axle? best to worst case.
|
Not sure, call this number "Suncoast Porsche Parts Department" 1-877-923-1700
|
|
|
|
|
01-14-2008, 10:36 AM
|
#16
|
|
Registered User
Join Date: Dec 2005
Location: South Riding, VA
Posts: 322
|
The drive shaft list price is $633 which includes the dust bellows, clips, etc.
|
|
|
|
|
01-14-2008, 10:54 AM
|
#17
|
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
I'm going to get under my car TONIGHT and inspect those bolts to make sure they're not loose! 
|
|
|
|
|
01-14-2008, 02:23 PM
|
#18
|
|
Registered User
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
|
Quote:
|
Originally Posted by CJ_Boxster
Not sure, call this number "Suncoast Porsche Parts Department" 1-877-923-1700
|
Try Sunset Imports, Suncoast can't beat their pricing.
Both are great shops but Sunset is better w/ pricing and the speed of delivery.
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
|
|
|
|
|
01-14-2008, 02:47 PM
|
#19
|
|
Registered User
Join Date: Mar 2005
Location: South Carolina
Posts: 530
|
Quote:
|
Originally Posted by blinkwatt
Try Sunset Imports, Suncoast can't beat their pricing.
Both are great shops but Sunset is better w/ pricing and the speed of delivery.
|
For those of us on the east coast, Suncoast in FL may actually be cheaper and quicker, since they are also located here. It takes a while and cost more to ship coast-to-coast.
Sunset is in OR, which would be quicker and cheaper shipping for you.
__________________
Jack
2000 Boxster S - gone -
2006 Audi A6 Quattro 3.2
|
|
|
|
|
01-14-2008, 03:01 PM
|
#20
|
|
Registered User
Join Date: Oct 2005
Location: Seattle
Posts: 352
|
Did you check for cat remains in the wheelwell?
__________________
2000 Black Boxster S
EVO Intake & GIAC Tuning
Headers & Porsche Sport Exhaust System
ROW M030 Suspension
Front & Rear Strut Braces
B&M Short Shift & EVO Billet Linkage
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 01:01 AM.
| |
Linear Mode
