New Radio Install - no sound

[kfernald]

I have replaced my radio with an Eclipse AVN2210p. (me: 97 Boxster/old radio CR210 w/factory amp) Everything appears to function properly but I have no sound. I recall reading something about an output from my radio that is needed to turn on my amplier; could this be my problem?

I have been unable to find the post that mentioned it. Any help would be greatly appreciated.

Ken

[Chills]

You are exactly right. You need to connect the wire that turns on the amp. Your new radio should have a wire which you can connect to the factory harness.

I had the exact same problem with my Pioneer AVIC. Its a simple fix.

[kfernald]

Thanks much, found it.