Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Reply
 
LinkBack Thread Tools Display Modes
Old 10-14-2007, 10:52 AM   #1
Registered User
 
Join Date: Sep 2007
Location: St Petersburg FL
Posts: 13
New Radio Install - no sound

I have replaced my radio with an Eclipse AVN2210p. (me: 97 Boxster/old radio CR210 w/factory amp) Everything appears to function properly but I have no sound. I recall reading something about an output from my radio that is needed to turn on my amplier; could this be my problem?

I have been unable to find the post that mentioned it. Any help would be greatly appreciated.

Ken

kfernald is offline   Reply With Quote
Old 10-15-2007, 01:13 PM   #2
Registered User
 
Join Date: Sep 2006
Location: Naperville, IL
Posts: 793
Send a message via Yahoo to Chills
You are exactly right. You need to connect the wire that turns on the amp. Your new radio should have a wire which you can connect to the factory harness.

I had the exact same problem with my Pioneer AVIC. Its a simple fix.
__________________
I bleed green

It's not about the summit, it's about the climb.


http://i133.photobucket.com/albums/q46/chills1138/2.jpg
Chills is offline   Reply With Quote
Old 10-15-2007, 02:21 PM   #3
Registered User
 
Join Date: Sep 2007
Location: St Petersburg FL
Posts: 13
Thanks much, found it.

kfernald is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page