Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-06-2007, 11:11 AM   #1
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
that spoiler looks pretty nice when its down, when up it looks goofy.
i dont like the way that the fixed on looks at all...
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 03-06-2007, 11:16 AM   #2
Registered User
 
Join Date: Sep 2006
Location: Naperville, IL
Posts: 793
Send a message via Yahoo to Chills
Quote:
Originally Posted by djomlas
that spoiler looks pretty nice when its down, when up it looks goofy.
i dont like the way that the fixed on looks at all...

I hope you're talking about the eBay one. That Gemballa one is sweet.
__________________
I bleed green

It's not about the summit, it's about the climb.


http://i133.photobucket.com/albums/q46/chills1138/2.jpg
Chills is offline   Reply With Quote
Old 03-06-2007, 11:30 AM   #3
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
Quote:
Originally Posted by djomlas
that spoiler looks pretty nice when its down, when up it looks goofy.
i dont like the way that the fixed on looks at all...
To each his own. Porsche has used fixed spoilers as an aftermarket option for some time now. But not everyone likes it. I just preffer not to drill any holes in my trunk, that's why I went the one I have. Only uses 3M double sided tape.
porsche986spyder is offline   Reply With Quote
Old 03-06-2007, 11:45 AM   #4
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
o no, the gemballa one and the ebay one look nie when down (well gemballa looks nice either way)

the other one i dont like, one thats just taped on the trunk
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 03-06-2007, 12:22 PM   #5
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
Quote:
Originally Posted by djomlas
o no, the gemballa one and the ebay one look nie when down (well gemballa looks nice either way)

the other one i dont like, one thats just taped on the trunk
Well it looks better than this big wing that Porsche sells in the Techquipment section. This thing is so big and does not even conform with the lines of the car.

At least mine is very small and fits nicely between the tailights. But everyone has there own opinion.
porsche986spyder is offline   Reply With Quote
Old 03-06-2007, 12:33 PM   #6
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
New look of 987 spoiler

This is where I got my idea for the new 987 sport package that has this type of spoiler.

As you can see the one I used is the same shape and size as the new 07 design. I think it looks cool and more modern.
porsche986spyder is offline   Reply With Quote
Old 03-06-2007, 11:50 AM   #7
Registered User
 
Join Date: Nov 2006
Location: Renton
Posts: 15
Brilliant Idea! Cappy!

How about a "cap" type spoiler on top of the factory unit?! That way I get the look AND the function!!!


Would the combined aero be funky? How bad could it be? Extra "John Goodman" I want, at high speed.


I would buy the cheapo and shave it and make a cappy.
demonz is offline   Reply With Quote
Old 03-06-2007, 12:07 PM   #8
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
Quote:
Originally Posted by demonz
How about a "cap" type spoiler on top of the factory unit?! That way I get the look AND the function!!!


Would the combined aero be funky? How bad could it be? Extra "John Goodman" I want, at high speed.


I would buy the cheapo and shave it and make a cappy.
That would be ideal. I've seen it done before on some other cars. Look at this one. That's what they did. Added a small bridge ontop of the stock one.
http://www.porscheshop.co.uk/acatalog/porsche_boxster_body_styling.html

Last edited by porsche986spyder; 03-06-2007 at 12:13 PM.
porsche986spyder is offline   Reply With Quote
Old 03-06-2007, 03:07 PM   #9
Registered User
 
Join Date: Nov 2006
Location: Renton
Posts: 15
Quote:
Originally Posted by porsche986spyder
That would be ideal. I've seen it done before on some other cars. Look at this one. That's what they did. Added a small bridge ontop of the stock one.
http://www.porscheshop.co.uk/acatalog/porsche_boxster_body_styling.html

I like it!


Now would one of you guys or gals with a broken/cracked aftermarket wing want to sell or donate this to me I would figure a way and document how to fasten it to the stock spoiler. Maybe I can even make a mold of the cappy and dupe it.


Or spend the 300 bucks for the bridge type spoiler and be done with it...decisions, decisions... Out of the box sure sounds appealing.
demonz is offline   Reply With Quote
Old 03-06-2007, 04:09 PM   #10
Registered User
 
Thumper's Avatar
 
Join Date: Dec 2004
Location: McKinney, TX
Posts: 474
That's not what I had in mind. That has a bit of a rice-a-roni look to it.

I was thinking of shaving the lower half of the aftermarket wing off and bonding it to the top of the factory spoiler so that I would have the look of the aftermarket wing, but the improved mounting of the factory unit.

Before I do anything dramatic, I'm going to look at the way the wing mounts and see if I can improve/modify the mount so that I don't run into some of the same problems that others have experienced.
Thumper is offline   Reply With Quote
Old 03-07-2007, 04:37 AM   #11
Registered User
 
Join Date: Sep 2006
Location: Naperville, IL
Posts: 793
Send a message via Yahoo to Chills
Quote:
Originally Posted by Thumper
That's not what I had in mind. That has a bit of a rice-a-roni look to it.

I was thinking of shaving the lower half of the aftermarket wing off and bonding it to the top of the factory spoiler so that I would have the look of the aftermarket wing, but the improved mounting of the factory unit.

Before I do anything dramatic, I'm going to look at the way the wing mounts and see if I can improve/modify the mount so that I don't run into some of the same problems that others have experienced.

I understand exactly what you mean. How hard do you think it would be to attach it?

I'd like to see how that would look, but I'm pretty set on the Gemballa one.
__________________
I bleed green

It's not about the summit, it's about the climb.


http://i133.photobucket.com/albums/q46/chills1138/2.jpg
Chills is offline   Reply With Quote
Old 03-06-2007, 04:16 PM   #12
Registered User
 
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
Quote:
Originally Posted by demonz
I like it!


Now would one of you guys or gals with a broken/cracked aftermarket wing want to sell or donate this to me I would figure a way and document how to fasten it to the stock spoiler. Maybe I can even make a mold of the cappy and dupe it.


Or spend the 300 bucks for the bridge type spoiler and be done with it...decisions, decisions... Out of the box sure sounds appealing.
Hi,

That's gotta be for aesthetics only because the Wing and Spoiler would interfere with one another aerodynamically, maybe not enough to matter, but they would in any case...

Happy Motoring!... Jim'99
MNBoxster is offline   Reply With Quote
Old 03-07-2007, 06:46 AM   #13
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
Quote:
Originally Posted by demonz
I like it!


Now would one of you guys or gals with a broken/cracked aftermarket wing want to sell or donate this to me I would figure a way and document how to fasten it to the stock spoiler. Maybe I can even make a mold of the cappy and dupe it.
.
I still have my cracked one. Make me an offer and I may ship it to you.
porsche986spyder is offline   Reply With Quote
Old 03-07-2007, 06:57 AM   #14
Registered User
 
Thumper's Avatar
 
Join Date: Dec 2004
Location: McKinney, TX
Posts: 474
demonz,

If you don't give it a try, let me know and I might. I'm in the DFW area, so shipping wouldn't be necessary.
Thumper is offline   Reply With Quote
Old 03-07-2007, 08:58 AM   #15
Registered User
 
Join Date: Jan 2007
Location: Texas
Posts: 1,311
Quote:
Originally Posted by demonz
I like it!


Now would one of you guys or gals with a broken/cracked aftermarket wing want to sell or donate this to me I would figure a way and document how to fasten it to the stock spoiler. Maybe I can even make a mold of the cappy and dupe it.


Or spend the 300 bucks for the bridge type spoiler and be done with it...decisions, decisions... Out of the box sure sounds appealing.
I did not realize you made this post. I have my cracked spoiler still if you are interested in cutting and reshapping it to fit the stock one some how. Send me a personal mesage and we can talk about shipping and cost.
porsche986spyder is offline   Reply With Quote
Old 03-07-2007, 09:13 AM   #16
Registered User
 
Join Date: Nov 2006
Location: Renton
Posts: 15
Thumbs up

porsche986spyder, PM sent.


Thumper,

Thanks for giving me first shot.
demonz is offline   Reply With Quote
Old 03-18-2007, 01:13 PM   #17
Registered User
 
Join Date: Jul 2006
Location: Philly, Niefern DE
Posts: 119
I was wondering if anybody ever got a price for the Gemballa style spoiler?
__________________
Thom
'81 911 SC ROW = The Money Pit
'02 Boxster S = Daily Driver
thomschoon is offline   Reply With Quote
Old 04-27-2007, 11:37 AM   #18
Registered User
 
Join Date: Feb 2006
Location: NJ
Posts: 4
Quote:
Originally Posted by thomschoon
I was wondering if anybody ever got a price for the Gemballa style spoiler?
I saw something on another web site that said it was over $3000 new. The guy was selling a used one for $2500 I'm not certain, but am pretty sure it was this spoiler.

I-N-S-A-N-E !
atmorrisjr is offline   Reply With Quote
Old 04-27-2007, 07:10 PM   #19
Registered User
 
Join Date: Nov 2006
Location: Bastrop, TX
Posts: 705
I called today to get a price from gemballa usa. 895$, unpainted.
James
jhandy is offline   Reply With Quote
Old 03-06-2007, 02:06 PM   #20
Registered User
 
Thumper's Avatar
 
Join Date: Dec 2004
Location: McKinney, TX
Posts: 474
Quote:
Originally Posted by demonz
How about a "cap" type spoiler on top of the factory unit?! That way I get the look AND the function!!!

I would buy the cheapo and shave it and make a cappy.
Now your talkin! I like that idea.

Anyone got the stock one they want to sell? Since I haven't taken mine in for paint, it's a prime candidate for giving this a try.
Thumper is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page