Swapping engines

[JFP in PA]

Originally Posted by LoneWolfGal

I'm giving Pedro's technoFix DOF another look.

From Pedro's site, describing his product: "[O]ur oil supply to the DOF uses oil which has passed through the filter and then through the cooler, before it goes onto the IMS bearing. ... This oil feed is supplied by the factory, so there is no drilling or tapping on the engine, simply screwing on a (supplied) adapter."

https://pedrosgarage.com/site-4/dof-info.html

If it's true that cool, filtered oil lubricates the bearing then Pedro's technoFIX is equivalent to LN's Solution for less than half the cost. The price for the technoFIX is $800, which doesn't include the bearing, $50 for single row or $100 for the double. (At this point I don't know which one my new engine has. I'll need a bearing extractor and the doohickeys to lock the cam chains and release the tensioner before I can find out.)

I emailed Pedro and asked for a better description and/or photo of the aforementioned screw-on adapter for the oil feed. The other end of the oil line is connected to the flange, like LN's Solution.

It is your car and your money, but both statements are wrong, the oil feed for the DOF comes from the cylinder head, one of the hottest and dirtiest sources of oil in the engine, the Solution takes it from the oil filter area, which is just after the oil cooler and after the oil has just been filtered. It isn't even remotely close to what the Solution is

[LoneWolfGal]

Originally Posted by JFP in PA

It is your car and your money, but both statements are wrong, the oil feed for the DOF comes from the cylinder head, one of the hottest and dirtiest sources of oil in the engine, the Solution takes it from the oil filter area, which is just after the oil cooler and after the oil has just been filtered. It isn't even remotely close to what the Solution is

I agree, the cylinder head would be about the worst source of oil, definitely a dealbreaker. But I wonder where "screwing on a (supplied) adapter" comes into the picture? That could describe LN's Solution's method. Curious to know what Pedro has to say about this matter? I am, so I'll ask him. And hey — good looking out.

[JFP in PA]

Originally Posted by LoneWolfGal

I agree, the cylinder head would be about the worst source of oil, definitely a dealbreaker. But I wonder where "screwing on a (supplied) adapter" comes into the picture? That could describe LN's Solution's method. Curious to know what Pedro has to say about this matter? I am, so I'll ask him. And hey — good looking out.

If you look at the photo I sent above, the fitting on the left with the Oring seal on it is the one that screws into the cylinder head port. No one can use the spin on filter adaptor used in the Solution, like many other features, it is patented.

[LoneWolfGal]

Originally Posted by JFP in PA

If you look at the photo I sent above, the fitting on the left with the Oring seal on it is the one that screws into the cylinder head port. No one can use the spin on filter adaptor used in the Solution, like many other features, it is patented.

I'm very curious to see how Pedro will justify those statements. I won't hold my breath. I've emailed him three times in the past two days with questions about the technoFIX and he has yet to respond. Maybe he only wants customers who don't ask questions.