Feels like a misfire under load 🤷****♂️

[Stl-986]

There is a code though. He showed an O2 code earlier

[colacharlie]

Hi all. Vacuum test complete plus a smoke test and small leaks found and O rings renewed, plus fuel pressure test complete and all in range and spot on. Car runs a bit better but still judders and is still horrible. I’m going to buy a set of injectors (second hand) for my 2.7 2002 and wonder if someone might know the product code of the injectors? Ps I have no access to the car Atm

[blue62]

Originally Posted by colacharlie

Hi all. Vacuum test complete plus a smoke test and small leaks found and O rings renewed, plus fuel pressure test complete and all in range and spot on. Car runs a bit better but still judders and is still horrible. I’m going to buy a set of injectors (second hand) for my 2.7 2002 and wonder if someone might know the product code of the injectors? Ps I have no access to the car Atm

Sorry don't know the product codes for injectors.
Ike84 or STL-986 will probably know

I take it your test for exhaust restriction tested ok?
Did you see if your CEL works??
I can also be tested with your Durametric.

Did you do another vacuum test after you found the small vacuum leaks
to see if it brought the vacuum readings up??

[gabedrummin]

For original injectors Porsche 2000 3.2 motor its a 996 606 120 01 .... There is a post for a 987 injector swap but you have to modify it .You have to add the groove for the injector clamp . Its a steel keeper that clamps the injector to to he rail .

[colacharlie]

Originally Posted by gabedrummin

For original injectors Porsche 2000 3.2 motor its a 996 606 120 01 .... There is a post for a 987 injector swap but you have to modify it .You have to add the groove for the injector clamp . Its a steel keeper that clamps the injector to to he rail .

It’s a 2.7 2002 buddy so it appears to be
0280156053

[blue62]

Originally Posted by Stl-986

There is a code though. He showed an O2 code earlier

Yes I saw that but he said no check engine light.
So was it a pending code????
Don't remember if Durametric shows pending codes.

Or Did it throw the code because he started it while working on it with somethig disconnected.????
Knowing when a code was thrown and under what conditions is kinda important.

Amazes me that Duarametric does not show freeze frame data. Bull **************** for the price of the thing. Some units even provide a time stamp in the freeze frame data.