99 coolant light blinking

[JFP in PA]

Four functions of the coolant warning light:

1. Engine coolant level too low

— light flashes slowly (0.5 Hz)

2. Engine compartment temperature too high

— light flashes slowly (0.5 Hz) (engine compartment blower might be faulty)

3. Engine coolant temperature too high

— light is lit; pointer on the right

4. Temperature sensor at water outlet faulty

— light flashes rapidly (1 Hz); pointer on the right

Note

The temperature warning in point three is indicated if the conditions "engine coolant temperature too high" and "engine coolant level too low" are present simultaneously

(1Hz = 1 flash per second. 0.5Hz = 2 seconds per flash)

[blue62]

Originally Posted by JFP in PA

Four functions of the coolant warning light:

1. Engine coolant level too low

— light flashes slowly (0.5 Hz)

2. Engine compartment temperature too high

— light flashes slowly (0.5 Hz) (engine compartment blower might be faulty)

3. Engine coolant temperature too high

— light is lit; pointer on the right

4. Temperature sensor at water outlet faulty

— light flashes rapidly (1 Hz); pointer on the right

Note

The temperature warning in point three is indicated if the conditions "engine coolant temperature too high" and "engine coolant level too low" are present simultaneously

(1Hz = 1 flash per second. 0.5Hz = 2 seconds per flash)

Thanks JFP that is the info I was trying to point him towards

[paulofto]

Add one more….. loose or cross threaded coolant cap.

Mine blinked a few years back while driving. It turned out the coolant tank cap was cross threaded. Earlier in the day I had checked the coolant level before going for a drive and I did not put it back properly.

Sometimes the issue is the simplest fix.