Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-24-2021, 08:18 AM   #1
Registered User
 
Join Date: Mar 2020
Posts: 2
Wow. Thank you, everyone.

Wasn't expecting so many thoughtful replies so quickly. You guys are ultimately the reason why I decided to buy a 986 in the first place, because I believed it when I heard there was a supportive community; thanks for rewarding my faith.

As for the actual issues...yes, I have tried the key in the door lock/unlock method, no luck. My poor, well-intentioned father said the same thing about the order of battery terminal removal not typically making a difference; perhaps I'm too focused on that being the cause. Either way, I've

When I get back to the car, first thing I'll do is pull out the seat / access the immobilizer to see if that fuse is blown. If it is, and anyone has knowledge/recommendations of the removal + fuse replacement process, I'm all ears!

piper6909, the tip about resetting the computer is helpful, thank you; I will give that a shot as well! Perhaps that's what happened in the first place, though, i.e. Dad's attempt to remove the negative terminal of the battery / flickering connection caused a computer reset to some degree.

Our main issue now, though, is getting the frunk open to even access the battery; apparently the levers for front and rear trunk won't budge (consequence of a blown immobilizer fuse?), so again, helpful hints are certainly welcome.

As for the "orange thing" I referenced before, I'm talking about the pop-out fuse box adapter that allows you to pass in 12V to pop the frunk: https://www.youtube.com/watch?v=1tZ1yUsdq7g

**

Thanks again to everyone; wish I could buy you guys each a beer just for your time (especially you, ike84)! If you ever find yourselves in NYC or Iowa City, IA, shoot me a message!
mikemcginn7 is offline   Reply With Quote
Old 03-26-2021, 04:24 AM   #2
Registered User
 
Join Date: Aug 2018
Location: Woodland Wa
Posts: 1,313
Quote:
Originally Posted by mikemcginn7 View Post
Wasn't expecting so many thoughtful replies so quickly. You guys are ultimately the reason why I decided to buy a 986 in the first place, because I believed it when I heard there was a supportive community; thanks for rewarding my faith.

As for the actual issues...yes, I have tried the key in the door lock/unlock method, no luck. My poor, well-intentioned father said the same thing about the order of battery terminal removal not typically making a difference; perhaps I'm too focused on that being the cause. Either way, I've

When I get back to the car, first thing I'll do is pull out the seat / access the immobilizer to see if that fuse is blown. If it is, and anyone has knowledge/recommendations of the removal + fuse replacement process, I'm all ears!

piper6909, the tip about resetting the computer is helpful, thank you; I will give that a shot as well! Perhaps that's what happened in the first place, though, i.e. Dad's attempt to remove the negative terminal of the battery / flickering connection caused a computer reset to some degree.

Our main issue now, though, is getting the frunk open to even access the battery; apparently the levers for front and rear trunk won't budge (consequence of a blown immobilizer fuse?), so again, helpful hints are certainly welcome.

As for the "orange thing" I referenced before, I'm talking about the pop-out fuse box adapter that allows you to pass in 12V to pop the frunk: https://www.youtube.com/watch?v=1tZ1yUsdq7g

**

Thanks again to everyone; wish I could buy you guys each a beer just for your time (especially you, ike84)! If you ever find yourselves in NYC or Iowa City, IA, shoot me a message!
The frunk will not open if the battery is disconnected.
Should be a pull cable behind the right front wheel well liner.
Do a search here on the forum should be info and pictures on cable location

Last edited by blue62; 03-26-2021 at 04:29 AM.
blue62 is online now   Reply With Quote
Old 03-26-2021, 06:15 AM   #3
Registered User
 
Join Date: Oct 2020
Location: KY
Posts: 1,213
Quote:
Originally Posted by blue62 View Post
The frunk will not open if the battery is disconnected.
Should be a pull cable behind the right front wheel well liner.
Do a search here on the forum should be info and pictures on cable location
You can access that cable from the circuit panel in the driver's footwell. Remove the panel cover and the front of the housing and the cable will be lying at the bottom.

Sent from my POCOPHONE F1 using Tapatalk
__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
ike84 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page