986 Forum - The Community for Porsche Boxster & Cayman Owners

- Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)

- - 996 Retrofits (http://986forum.com/forums/boxster-general-discussions/78937-996-retrofits.html)

Thank you everyone! You all have given me some great ideas. Now to buy the parts and get to implementing it. I can't wait. Be ready for more questions!

Has anybody ever heard of or worked with “The Retrofit Source”? Here is the link to there website.
https://www.theretrofitsource.com/morimoto-retroquik-bosch-low-beam-CRK-RQ-BOSCH?quantity=1

They overcharge and work is sub-par, to say the least.

D.
I.
Y.

I bought a Morimoto Mini Bi-Xenon kit from them to retrofit a set of Litronic lights. The RQ brackets they sent me would have mounted the projectors upside down, so they exchanged them for me free of charge for their universal brackets, which I then had to cut myself. The RQ brackets in the picture in your link look correct for Litronics but that isn't what they sent to me. The Morimoto components themselves were top notch, I can't speak about the quality or cost of any conversions they do.

Good to know. The one other question I have is about the fog lights. Is there a suggested upgrade for them? Or just switch to a better bulb.

Quote:

Originally Posted by JBauer (Post 626047)

Left: factory bowl with generic xenon projector, not able to center.
Right: With centering bracket, about $30 if ordered alone, adds room for larger projector and Panamera shrouds.

http://986forum.com/forums/uploads02...1603764845.jpg

Where did you buy the centering bracket?

Quote:

Originally Posted by tekkron64 (Post 626373)

Where did you buy the centering bracket?

I bought them through these guys but I had to specifically ask about them through their messaging system. I think they were about $40 a set.

https://www.retrofitlab.com/en/porsche-911-9961-1998-2001-halogen-headlights.html

What do you think of silver instead of black internals?

http://986forum.com/forums/uploads02...1604964165.jpg

Quote:

Originally Posted by JBauer (Post 626534)

What do you think of silver instead of black internals?

http://986forum.com/forums/uploads02...1604964165.jpg

Awesome! Would you have tips on painting? I had headaches with my projector install this week and gave up on spending any more time painting but now that everything is fixed, maybe I’ll give it a go..

My story-
Was going to work with 996retro but by the time I was ready this thread popped up so I purchased from retrofitslab.

My high and lo beam never worked so after reading the forums I bought both a light switch and ignition switch to perform my install all at same time.

Took me 30 min to pry the first one out but 5 min for the second with more confidence. 23 min in the oven at 220.

After installing everything my hi and low beams did not work- only angel eyes. Bit more than I can chew and thought I did a horrible job wiring the lights. Gave up last Sunday and brought it into mechanic.

My mistake was not fixing the original problem so they weren’t sure where to start. $1300 later, they replaced the combination switch and told me the light switch I bought (from eBay) was also broken

Picking it up in 4 hours with the headlights still unsealed. I learned that I suck at being a car guy. Never worked on cars and bought this one at the start of covid to learn as my pandemic project.

Mechanic also told me other things are broken so what I thought was a great deal on the car is starting to turn into a money pit. Not sure I have confidence to replace all those problems and may shell out the $1600 estimate. I do love the car though! No regrets.

2001 base - 44k miles

https://imgur.com/a/8if1YUE

Sent from my iPhone using Tapatalk

What is the best size and brand of projectors to get? There are so many out there.