Adding speakers to CDR23 MOST

[Leo G]

Yeah... the 4x40 amp in the front takes the 2 dash and 2 door.
I’m adding 2 rears. But ive added them to the back of the CDR directly. However i feel these dont work due to having the front amp.

So if i change the front amp to the 6x40w... is it the same wiring loom/plug that will now plug into the 6x40 amp?? And i just need to wire the New rears Into the back of the plug .

[Rayrevolver]

Not sure if the CDR220 is the same, but my car came with the amp and dash/door speakers. The original owner had the rear speakers installed and the wires when straight to the CDR.

Does the radio have a Fader? Could it be set to full forward so you are not hearing the rears?

My current setup, the Alpine uses the same RCA output to the amp. The amp still powers the front/door speakers. The rear speakers are direct to the Alpine. Works like the CDR220 did.

[Leo G]

The door subs are wired to the amp ‘rear’ outputs as i have the head unit faded slightly to the rear (doors) to get some more bass.

The more i hear from other avenues, is that the MOST amp cancels out the head unit inputs.

@europadrive. Thanks for that link. That is a head unit ive been looking at (but without an amp). Think its quite traditional looking and would suit the dash.
I would just need to re-route the speaker wires to the head unit and omit the front amp completely. Maybe pair the door subs in with the rears.

Unless of course... if the 6x40w amp change would work. (If anyone knows!)

[Cunningr]

Originally Posted by Leo G

Yeah... the 4x40 amp in the front takes the 2 dash and 2 door.
I’m adding 2 rears. But ive added them to the back of the CDR directly. However i feel these dont work due to having the front amp.

So if i change the front amp to the 6x40w... is it the same wiring loom/plug that will now plug into the 6x40 amp?? And i just need to wire the New rears Into the back of the plug .

I swapped out my 4x40 for a 6 channel from a 996 cabrio I bought on
ebay you have to trim off a tab on the connector and it connects. I think it was on rennlist there was a post said which amp and picture of the tab to cut.

I never installed rear speakers went another direction. 6.5 mid subs doors, 3” mids dash, and 1.5” tweeters, 8” sub mounted in a cabriolet bose sub housing.

[Leo G]

Thanks for the reply. Ive noticed that the 6x40w doesn’t seem to have the Fibre optic connection, which is what i need. So i think this option for me is now dead.

It could be a visit to a car audio installer for a full refurb.
Or
I could totally fudge what i have here, by splicing into my front dash speakers with the rears. (The cheap and nasty option).

[Cunningr]

Originally Posted by Leo G

Thanks for the reply. Ive noticed that the 6x40w doesn’t seem to have the Fibre optic connection, which is what i need. So i think this option for me is now dead.

It could be a visit to a car audio installer for a full refurb.
Or
I could totally fudge what i have here, by splicing into my front dash speakers with the rears. (The cheap and nasty option).

I realized you were talking most after I posted and then I couldn't find the post to update. My car has the m490 option i think it was. Sorry about the confusion.