Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

LinkBack Thread Tools Display Modes
Old 07-05-2019, 06:53 PM   #1
2000 986 S
Join Date: Apr 2017
Location: San Francisco
Posts: 78
Using spacer between bucket seat & side mounts

I have a sparco pro2000 with universal sparco side mounts and am using the stock sliders to bolt to the floor. When i have the mounts attached to the sliders the seat is too narrow and there is a 3/8 inch gap between the seat and side mount on both sides.

Would it be safe to use nylon spacers in between? I could always try drilling the holes on the side mounts wider for more adjustment but dont no if there is a tool more effective at doing this than a regular power drill/dremel.

Most_Wanted is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -8. The time now is 05:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page