12-14-2018, 01:24 PM
|
#1
|
|
Registered User
Join Date: Oct 2015
Location: Scituate MA
Posts: 870
|
Hardtop squeak
My new to me hardtop is squeaking at the drivers window.
Any suggestions on adjusting?
Thanks
|
|
|
|
12-14-2018, 02:59 PM
|
#2
|
|
Registered User
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
|
Is it the door window glass squeaking against the seal on the hardtop? The seals are supposed to be adjustable. This link I found is the most comprehensive hardtop adjusting instructions I have seen and has a sentence and picture on that adjustment. It looks like it came out a Porsche factory shop manual. I would love to see part numbers for those star gauges and see how much they cost.
|
|
|
|
|
12-14-2018, 05:09 PM
|
#3
|
|
Registered User
Join Date: Dec 2012
Location: FL
Posts: 4,143
|
Does it have the two little plastic buttons that snap on to the two "pins" at the front of the hardtop, where it meets the windshield frame? Mine were missing, and was pretty noisy until i got them.
|
|
|
|
|
12-14-2018, 07:39 PM
|
#4
|
|
Registered User
Join Date: Feb 2017
Location: North Eastern US
Posts: 646
|
Quote:
Originally Posted by steved0x
Does it have the two little plastic buttons that snap on to the two "pins" at the front of the hardtop, where it meets the windshield frame? Mine were missing, and was pretty noisy until i got them.
|
+1 on these. They make a big difference and they are often missing.
Sent from my iPad using Tapatalk
__________________
Rgds, Fred
#317 550 Spyder Anniversary Edition 2004 Boxster S, 3.8L Flat Six Innovations engine, PSS9s, etc, etc . . .
The contents of my posts are for entertainment only. As confirmed by my many motor sports fails, I am not qualified to give product endorsements or mechanical advice 
Last edited by Oldcarguy; 12-14-2018 at 07:41 PM.
|
|
|
|
|
12-15-2018, 02:51 AM
|
#5
|
|
Registered User
Join Date: Dec 2013
Location: Dahlonega , Georgia
Posts: 1,348
|
Anyone have a part number for those pin covers ? And are there similar for the rear locking pins ?
__________________
2002 Boxster S Arctic Silver with black top with glass window and black leather interior. Jake Raby 3.6 SS ( the beast ) with IMS Solution. 996 GT3 front bumper , GT3 rocker covers and GT3TEK rear diffuser and Joe Toth composites rear ducktail spoiler .
|
|
|
|
|
12-15-2018, 03:41 AM
|
#6
|
|
Registered User
Join Date: Feb 2017
Location: North Eastern US
Posts: 646
|
Quote:
Originally Posted by rfuerst911sc
Anyone have a part number for those pin covers ? And are there similar for the rear locking pins ?
|
According to the PET, it’s item 8, ‘cap’, nothing similar for the rear:
986 563 625 03
Sent from my iPad using Tapatalk
__________________
Rgds, Fred
#317 550 Spyder Anniversary Edition 2004 Boxster S, 3.8L Flat Six Innovations engine, PSS9s, etc, etc . . .
The contents of my posts are for entertainment only. As confirmed by my many motor sports fails, I am not qualified to give product endorsements or mechanical advice
Last edited by Oldcarguy; 12-15-2018 at 03:56 AM.
|
|
|
|
|
12-15-2018, 05:37 AM
|
#7
|
|
Registered User
Join Date: Oct 2015
Location: Scituate MA
Posts: 870
|
Thanks guys. I give the instructions a try. Also, I do have the plastic pieces.
|
|
|
|
|
12-15-2018, 04:21 PM
|
#8
|
|
There Is No Substitute.
Join Date: May 2007
Location: West Coast
Posts: 3,253
|
Those caps make the biggest difference, you can adjust the window tracks and the top itself. I have posted this previously:
Adjusting the hardtop is important to help reduce exessive squeaking and/or wind noise caused by poor fitment. I repeated this process several times the first few weeks after I installed my hardtop, as it was settling to my car. I also repeat this process when I reinstall the hardtop if it has been off the car for an extended period.
Inside the hardtop on each side, just above the spinlock levers there are two plastic covers that pop out to reveak three hex head bolts. To adjust the hardtop, secure the A-pillar clamp, then loosen the hex bolts on each side of the top. Have an assistant push forward and down as hard as possible on the hardtop, and tighten the bolts on each side. You may want to lock/unlock the spinlock levers while doing this. Repeat as necessary.
__________________
1999 Ocean Blue Metallic Boxster - blueboxster.com
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 04:47 PM.
| |
Porscha
