Dropping Boxster engine with a 4 post lift - anyone have tops on doing it?

[itsnotanova]

Sorry I didn't measure how how long but you'll need a minimum of 37 inches between the ramps. You need to be very careful of the solenoid cable sticking out of the head as it breaks very easily.

I added reinforcement to the backside of the ramp where I cut out for the notch. I've had heavy diesel trucks on it and there was no signs of bending. Sorry the picture's upside down

[Doug427]

Thanks so much, Woody - that'll get me a starting point at least.


Edit - Just measured my lift - if I notch it back the same exact way you did yours it'll give me 37 1/2" wide maximum - whew, that's close!