Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-10-2018, 03:34 AM   #12
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,086
Quote:
Originally Posted by Oldcarguy View Post
IMHO that’s the best look so far. I’d say it’s a decent 10 footer. At the least I’d add black, flat grill material (real flat grill material, not rain gutter mesh) behind the real vent openings to give them a ‘bottom’ to look similar to the false openings. This tricks the eye into looking ‘at’ the vent, not ‘through’ the vent. Just be sure to get grill material that flows enough air. Automotive Goop is your friend for bonding the grills. It remains flexible, has a reasonable working time and forms a strong bond on properly prepared surfaces.

To take it to the next level (required IMHO but you never know what it’s really gonna look like until you do it and those vents are relatively expensive)

1) carefully cut out the lower two openings, fill, sand and repaint the vent as necessary
2) add the same black grill material behind the new openings. One piece for the lower two openings. It will be close to the surface due to the vent design but it is what it is. In conjunction with step 3 this should work in your favor overall. Real grill material will also give the one (thin) red vane good structural support
3) apply some flat black body wrap to the car in a shape and size that fits completely under the pseudo vent openings. Applying the flat black wrap to the car not only blacks out the pseudo vents, it should also give the pseudo vents some visual sense of depth under their grill.
4) install the vents
5) Only downside is keeping the black body wrap clean without constantly taking the vents off

IIRC, this is basically what Porsche did (in a much more sophisticated fashion) in 2005 when they went to the big vents. If I’m not mistaken the 2005 interior body vent openings are about the same size as the earlier cars.
I agree with OCG... decent 10 footer. Looks far better without the mesh. Proceed with OCG's recommendations and it'll really shine.

On another note... have you considered side decals? The ones that run on the bottom from wheel-well to wheel-well? That might look nice in black.

Carry on!
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page