Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 07-07-2018, 04:27 AM   #1
Registered User
 
flouese's Avatar
 
Join Date: Aug 2015
Location: Callahan, FL
Posts: 390
Engine install

Is s there a DIY substitute for a flywheel locking tool?

__________________
99 Boxster base
1966 912 3 gauge
flouese is offline   Reply With Quote
Old 07-07-2018, 04:31 AM   #2
Registered User
 
Join Date: Dec 2016
Location: Clifton, NJ
Posts: 845
Little piece of metal with 2 holes for a bellhousing bolt and pressure plate bolt or dowel
Quadcammer is offline   Reply With Quote
Old 07-07-2018, 07:45 AM   #3
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,314
Flouese,
I used before a strip of angled iron with holes (the kind used for shelves, etc) and connect one of the flywheel bolts to one of the bellhousing holes.

First attach the FW side (loose) and then you move the strip of metal around until one of the holes align with one of the holes on the bellhousing, then tighten both ends will allow to torque down the flywheel.

This is what has worked for me, good luck!
Gilles is offline   Reply With Quote
Old 07-07-2018, 11:27 AM   #4
Registered User
 
Join Date: Aug 2015
Location: Brandon MB
Posts: 50
I used heavy duty zip ties.
CdnRD is offline   Reply With Quote
Old 07-07-2018, 07:15 PM   #5
Registered User
 
Join Date: Jun 2017
Location: Georgia
Posts: 36
Garage
https://www.homedepot.com/p/Basset-Products-3-4-in-x-50-ft-Perforated-Galvanized-Steel-Duct-Strap-DS50-1-28G/205871091?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-AllProducts%7c&gclid=Cj0KCQjwyYHaBRDvARIsAHkAXcuRvWB3-dWLDCloc8Oij2-KH3jo3gs6k9pz6GORRQ9h1OVXiNVnQCsaAtrBEALw_wcB&gclsrc=aw.ds&dclid=CNqkqt_EjtwCFWIIZQodts8I8Q

__________________
Joe K. Peachtree City GA
2001 986 Boxster S, Silver with black interior.
blueflames is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page