Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 04-11-2018, 08:19 AM   #1
Registered User
 
Join Date: Apr 2018
Location: belgium
Posts: 3
P2096

i have a fault code on mijn 986 s 2003

P2096 Post Catalytic Fuel Trim Bank 1 System Too Lean

i replaced the post cat o2 sensor, but the fault comes back after 80 miles

when i read the o2 sensors value with started engine

bank 1 post cat sensor stays almost all the time at 0.1 v
on bank 2 the sensor is 0.1 at idle, on acceration it goes up to 0.6-0.8
but bank 1 remains at 0.1

when i go off trottle both the sensors go to 0.000

both the o2 sensors are new,
the dealer thinks i have a bad cat, but he is not 100% sure

take the gamble en replace?
or are there things i can check myself?
tjokke is offline   Reply With Quote
Old 04-11-2018, 09:03 AM   #2
Registered User
 
Join Date: Apr 2018
Location: belgium
Posts: 3
now by accident, i noticed that in high rpm above 5000,
the sensor react normal,
tjokke is offline   Reply With Quote
Old 04-11-2018, 12:17 PM   #3
Registered User
 
Join Date: May 2016
Location: Northville, MI
Posts: 249
Are the front O2s cycling back and forth on both banks?
bwdz is offline   Reply With Quote
Old 04-11-2018, 01:03 PM   #4
Registered User
 
Join Date: Apr 2018
Location: belgium
Posts: 3
Quote:
Originally Posted by bwdz View Post
Are the front O2s cycling back and forth on both banks?
Yes they act normal going from 0.1-0.8

The second sensors
On bank 2 stays 0.1 on idle
En Goes slowly up When i raise rmp or driving

On bank 1 iT stays 0.1 if i drive
Only at high rpm iT Goes also to 0.6-0.8
tjokke is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page