Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 08-30-2007, 01:55 AM   #1
boxsterz
Guest
 
Posts: n/a
Sorry about your mis-hap. It's too bad you got faulty advice from an "expert" here. Personally I find this forum a nice resource, but the longer I'm here, the more evident that a fair amount of misinformation is floating around. I suppose this is to be expected, and that's what forums like this are for... At least I hope so.




It's posts like yours that makes the forum. Your follow up is what it's all about! You rock!!
 
Old 08-30-2007, 03:34 AM   #2
bmussatti
Guest
 
Posts: n/a
Wow, pretty amazing.
 
Old 08-30-2007, 07:54 AM   #3
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
Now I know what to do if I mistakenly put the wrong thing in my fuel tank. Thanks for your willingness to share your experience, even if it was an embarassing.
RandallNeighbour is offline  
Old 08-30-2007, 08:17 AM   #4
Registered User
 
Join Date: Oct 2005
Location: Japan
Posts: 342
Thanks for the sympathy and compliment, but I didn't mean to discredit anyone that gave me advices in the first place. I value advices including opinions a lot as they helped me in many situations. I was the one that made the final decision so I took full responsiblity.

It took about 9 months for the coolant additive to clog the engine, so I bet it got into the fuel lines little by little and eventually fully clogged the fuel lines.

I believe if the car is a corvette or a hot rod V8, this problem probably wouldn't occur in the first place. Boxster's engine is 'delicate' I mean look at those fuel lines, they are so tiny!

Quote:
Originally Posted by boxsterz
Sorry about your mis-hap. It's too bad you got faulty advice from an "expert" here. Personally I find this forum a nice resource, but the longer I'm here, the more evident that a fair amount of misinformation is floating around. I suppose this is to be expected, and that's what forums like this are for... At least I hope so.




It's posts like yours that makes the forum. Your follow up is what it's all about! You rock!!
__________________
2004 Porsche Boxster S
threpwood is offline  
Old 08-30-2007, 08:21 AM   #5
Registered User
 
Join Date: Dec 2006
Location: Austin, TX
Posts: 939
Lesson:

Be DAMN sure of what you're putting in the gas tank of your $60,000 car!!
__________________
2001 Boxster - Grey on Grey
1969 911T Targa - 'Stinky'

http://www.zoto.com/frayadjacent/img...f27a-4a399.jpg <---- my car. ^ crap I post.

"The existence of the flamethrower is evidence that someone, somewhere once said 'I want to set those people over there on fire, but I don't want to have to walk over there to do it.'"
FrayAdjacent is offline  
Old 08-30-2007, 08:39 AM   #6
Registered User
 
Join Date: Oct 2005
Location: Japan
Posts: 342
I agree

Just wanted to add that the porche mechanic told me that there was another similar case in Japan, which involved a caramel in the fuel lines. Apparently someone's kid found a way to put a caramel candy in the gas tank and the caramel melted clogging the fuel line

Quote:
Originally Posted by FrayAdjacent
Lesson:

Be DAMN sure of what you're putting in the gas tank of your $60,000 car!!
__________________
2004 Porsche Boxster S
threpwood is offline  
Old 08-30-2007, 09:17 AM   #7
Registered User
 
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
Hi,

I'm skeptical that the WW was the cause of your issues. For 9 mos. to pass is too long for an issue to manifest itself and there could be too many intervening possibilities in this rather long time interval.

There is only 1 ingredient in Water Wetter which could pose any kind of issue at all - Tolyltriazole, a PolySiloxane Polymer used for corrosion inhibitance.

The other ingredients are either alcohols (DiIsoPropyl Alcohol Ether and TriIsopropyl Alcohol Diether) used as surfactants, or are additives (Sodium Molybdate) actually used by petroleum refiners in Gasoline and Jet Fuel to reduce gasoline's natural tendency to swell and gel - the exact opposite of what you are inferring.

Tolyltriazole makes up only 1% of WW composition (source: Redline WW MSDS) and if you only added 60ml, that would mean no more than .6ml, a very small amount when stacked against 9 mos. volume of Fuel.

This chemical is not soluable in gasoline, but will precipitate out of solution into a white powder with a Specific Gravity higher than the Fuel meaning that it would drop to the bottom of the Tank. Should it be picked up, as a particulate, it should get trapped by the Fuel Filter and not flow past it - it could in sufficient quantities clog the Filter, but that's about it. The storage and distribution methods for gasoline will introduce a much greater volume of other particulates (oxides, waxes, parafins, etc.) than that over a 9 mo. period.

The total volume of these 4 chemicals does not total 16% of WW. I suspect that either you added considerably more WW than you stated or, more likely, that you got some contaminated Fuel in the interim. The chemistry involved simply does not validate a lot of cause and effect here.

In any event, be sure that you are also replacing the Fuel Filter and flushing the Fuel Tank to insure that no remnants of the suspect material remains. Glad you got it all sorted out...

Happy Motoring!... Jim

Last edited by MNBoxster; 08-30-2007 at 09:35 AM.
MNBoxster is offline  
Old 08-30-2007, 09:41 AM   #8
Registered User
 
Join Date: May 2002
Location: San Jose
Posts: 1,889
The pictures are so small it is hard to see anything in detail. Looks like the fuel rail was taken off.
Tool Pants is offline  
Old 08-31-2007, 07:09 AM   #9
Registered User
 
Join Date: Jan 2007
Location: Depends on the day of the week....
Posts: 1,400
I agree with Jim, I highly doubt that whatever amount of WW you added caused this. I'm also REALLY surprised to see them tear down your engine this much to fix the problem.

Patrick
Cloudsurfer is offline  
Old 08-30-2007, 11:34 AM   #10
boxsterz
Guest
 
Posts: n/a
Quote:
Originally Posted by MNBoxster
Hi,

I'm skeptical that the WW was the cause of your issues. For 9 mos. to pass is too long for an issue to manifest itself and there could be too many intervening possibilities in this rather long time interval.

There is only 1 ingredient in Water Wetter which could pose any kind of issue at all - Tolyltriazole, a PolySiloxane Polymer used for corrosion inhibitance.

The other ingredients are either alcohols (DiIsoPropyl Alcohol Ether and TriIsopropyl Alcohol Diether) used as surfactants, or are additives (Sodium Molybdate) actually used by petroleum refiners in Gasoline and Jet Fuel to reduce gasoline's natural tendency to swell and gel - the exact opposite of what you are inferring.

Tolyltriazole makes up only 1% of WW composition (source: Redline WW MSDS) and if you only added 60ml, that would mean no more than .6ml, a very small amount when stacked against 9 mos. volume of Fuel.

This chemical is not soluable in gasoline, but will precipitate out of solution into a white powder with a Specific Gravity higher than the Fuel meaning that it would drop to the bottom of the Tank. Should it be picked up, as a particulate, it should get trapped by the Fuel Filter and not flow past it - it could in sufficient quantities clog the Filter, but that's about it. The storage and distribution methods for gasoline will introduce a much greater volume of other particulates (oxides, waxes, parafins, etc.) than that over a 9 mo. period.

The total volume of these 4 chemicals does not total 16% of WW. I suspect that either you added considerably more WW than you stated or, more likely, that you got some contaminated Fuel in the interim. The chemistry involved simply does not validate a lot of cause and effect here.

In any event, be sure that you are also replacing the Fuel Filter and flushing the Fuel Tank to insure that no remnants of the suspect material remains. Glad you got it all sorted out...

Happy Motoring!... Jim



Jim, I know you mean well, and feel you have a lot to offer. But it's technical half speak like this that could've saved him $3K. There is no doubt about it in my mind, the water wetter was the culprit. He had the gunk analyzed. What more do you want? Can't you admit you were wrong I mean everyone is from time to time.


Cyanide will kill a human being in the minutest concentrations. The small concentrations point is invalid. 60ml was meant to treat several gallons of water/coolant. WW is obviously soluble in water, as it was engineered as an additive for water and water based coolant. Water and gas don't mix. I saw with my own eyes old gas drained out of a jalopy many many years ago. I shook the hell out of that glass jar too, and still the water stayed on the bottom and coalesced back into larger drops of water. So I can imagine how WW will not dissolve into gas. Also the fuel filter is only effective against particulates in the micron range, where liquids are much smaller.


Gasoline can be a delicate fuel, starting up my lawnmower with 3 month or older gas demonstrates that. Put fresh gas in, it starts right up on the 1st pull. I do realize however that gas can tolerate some moisture, and I also know there are fuel additives such as "Heet" designed to absorb excess moisture. How much moisture can be miscible I don't know.


I'm no chemist, and it's too bad none were available on this forum. It wouldn've been cheap to contact Redline or Porsche and get some REAL expert advice. Instead, threpwood was dissuaded from that course, which is a shame.

Last edited by boxsterz; 08-30-2007 at 12:21 PM.
 
Old 08-30-2007, 10:16 PM   #11
Registered User
 
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
Hi,

@boxsterz - As you state, you are no Chemist. It's technical half speak like this that can contribute to misinformation as well as discreditation of an otherwise sound piece of advice.

Not wanting to start a Flame War, I am also not a Chemist, but I do hold a BS in Material Science and minored in Organic Chemistry (essentially a pre-requisite) from a Big 10 university which ranks very high nationally in both chemistry and materials science.

The chemicals I listed and their properties are correct. They are not made up, but reported by Redline in it's required MSDS publication which I researched before offering my initial advise to the lister.

These are not rare chemicals at all, but well known and used for a variety of purposes. The only one which would not remain in a liquid state when mixed with gasoline is Tolyltriazole, which is also used in the manufacture of pharmaceuticals, fertilizers, and any number of other products. All other ingredients would have flowed through the injectors and been combusted in the cylinder along with the fuel, and within that specific volume of fuel which was contaminated, there would have been no residual effects. These other chemicals are not altered in the presence of gasoline and all burn well within the combustion temperatures of gasoline.

The Tolyltriazole would not, it would precipitate out of solution as a white powder and drop to the bottom of the Tank as it is heavier than gasoline. Interestingly, it is Blue upon manufacture, not Red as was the color of the gel found by the mechanic.

You see cause and effect while admittedly knowing nothing about the interaction of these chemicals with other substances, not a very sound conclusion, and seemingly taking a jab at those who at least stepped forward, did some research, and replied to the lister's request - seems you've been absent from this thread up to that point. You are merely looking at the linearity of one event preceeding the other. That has the same validity as saying that Rain caused the issue because the car was rained on before the engine started acting up.

My knowledge of these chemicals and their interactions says this incident was not the culprit, therefore, something else must be responsible. A likely possibility, though certainly not the only one, is that in the lengthy interim (in the same 9 mos. I added more than 93 gal. of fuel to my car which is solely used for occaisional pleasure driving), something else was introduced into the Fuel supply causing the issue such as contaminated fuel, or even as the lister eluded a mischievous substance was introduced (perhaps a Red Gummy Bear - just as possible). But it's unlikely that the WW was the cause.

You have offered no proof, other than your belief that the WW was the culprit, along with some anecdote about Fresh Gas being better than Stale Gas to make, or solidify, whatever case you're trying to make, now that's technical half speak.

I am fully prepared to admit being wrong, as I have done often in the past, if someone can show that to be the case.

With repsect to the Lister, I did not shoot from the hip with my initial reply but researched his query pretty thoroughly before responding. I would never intentionally give someone harmful advice or offer any whatever if I didn't feel I knew what I was talking about (ever casually notice how many threads I do not reply to? This is often the reason why).

And, it wasn't me who mistakenly added the questionable substance to begin with, or the one who chose a path of action. So don't try and infer that I am somehow responsible for all this because I am simply not.

People make their own choices, whether it is to choose or to ignore any particular advice offered here, by anyone. To try and condemn advice here is to make people ignore sound advice and cause those knowledgeable people to shrink from giving it. Then we're just talking about Headlight mods and Wheel colors and many owners would not like to see the forum move to that direction.

I won't discuss this further on open forum with you as you seem intent on being divisive and simply use it as a soapbox for whatever vindictiveness you harbor toward me or whatever. If you want to PM me, I'll reply as I see fit, but I won't be party to a lynch mob no matter how badly you may wish to organize one. I welcome other knowledgeable replies as well...

Happy Motoring!... Jim'99

Last edited by MNBoxster; 08-31-2007 at 11:53 AM.
MNBoxster is offline  
Closed Thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page