Amp plug wire question poweron

[Cunningr]

Thanks I believe this will get me going again. My extra amp I bought was cut out from the wiring harness so I have the wires for speakers figured out nicely. Just on the schematic wasn't exactly sure which was switched to turn on the amp.

The input connector is the smaller connector correct?

I am have the big connector out and ready to start soldering the speaker connections in. Going to solder those with short lengths to a connector board.

drilling the end plat for the RCA cables.

The problem I had was identifying the switched so I think I am back in business now.

Also near having the extra door boxes ready for the 6.5" Going to use the pioneer network mode for cross over duties.

[gsy4771]

Originally Posted by Cunningr

Thanks I believe this will get me going again. My extra amp I bought was cut out from the wiring harness so I have the wires for speakers figured out nicely. Just on the schematic wasn't exactly sure which was switched to turn on the amp.

The input connector is the smaller connector correct?

I am have the big connector out and ready to start soldering the speaker connections in. Going to solder those with short lengths to a connector board.

drilling the end plat for the RCA cables.

The problem I had was identifying the switched so I think I am back in business now.

Also near having the extra door boxes ready for the 6.5" Going to use the pioneer network mode for cross over duties.

Do you have any pictures of the finished adapter?

[Cunningr]

Originally Posted by gsy4771

Do you have any pictures of the finished adapter?

No pics, nothing to see, really once i put together i wrapped it. Not show car but if i want to go back to stock its unplug aftermarket and plug stock amp and srew in mount plate.

[gsy4771]

Originally Posted by Cunningr

No pics, nothing to see, really once i put together i wrapped it. Not show car but if i want to go back to stock its unplug aftermarket and plug stock amp and srew in mount plate.

ok, i understand. i just started this project and bought a done amp yesterday. i removed the plug and ready to attach the speaker wire. i have straighten the leads on the plug and planned on soldering directly to them. Is that what you did?

[Cunningr]

Originally Posted by gsy4771

ok, i understand. i just started this project and bought a done amp yesterday. i removed the plug and ready to attach the speaker wire. i have straighten the leads on the plug and planned on soldering directly to them. Is that what you did?

Exactly be careful with the heat I got to hot. If you could extract the pins it would be easier. Was a pain getting the connector off the circuit board. For the rca inputs I just ran cables to the amp in the end, so only connecting for speakeroutput.