Passenger 996 bose subwoofer retrofit

[azlvr]

Originally Posted by alm001

I would say: Don't worry about adding a sub till after you install those three ways, and decide its not enough low end. Maybe you'll be happy enough to forgo the added cost and complexity.

I agree with you completely. Get a sound processor instead.

[Cunningr]

Originally Posted by azlvr

I agree with you completely. Get a sound processor instead.

Using the headunit for processing duties, its pioneer 80 prs has alot of processing capabilities.

[azlvr]

Originally Posted by Cunningr

Using the headunit for processing duties, its pioneer 80 prs has alot of processing capabilities.

My hu has those capabilities also but my Audison bit 10 has far more capabilities. It plugs into a laptop with tons of adjustabilitys. Your speakers are a cousin to mine and the amp is the same I have with 150w per channel.

[Cunningr]

Originally Posted by azlvr

My hu has those capabilities also but my Audison bit 10 has far more capabilities. It plugs into a laptop with tons of adjustabilitys. Your speakers are a cousin to mine and the amp is the same I have with 150w per channel.

I may upgrade later, and add a processor but got to get project back under control. Lol

I almost ordered those Audison speakers myself. Is there enough room to have a .25 inch spacer under the door speaker?

Also how do you get 5he factory radio frame out, instructions are not clear.

[azlvr]

Originally Posted by Cunningr

I may upgrade later, and add a processor but got to get project back under control. Lol

I almost ordered those Audison speakers myself. Is there enough room to have a .25 inch spacer under the door speaker?

Also how do you get 5he factory radio frame out, instructions are not clear.

You can use .75 in.

[Cunningr]

Originally Posted by azlvr

You can use .75 in.

Thanks have a .25” set, i will be bonding them on to the enclosure and then trim out inner ring.