Turn signals not working
After hooking up my tire trailer I found my turn signals didn't work. Checked fuses and replaced flasher. Hazards work. A local shop agreed with me it must be the turn signal switch. They sold me a supposedly good used one. However after installation, still no turn signals. Is there any procedure to troubleshoot the pins on the back? Any other possibiliities? It's a 2000 Boxster. Thanks.
|
Both front and back? Indicator on dash?
|
When was the last time you changed your:
https://s3.amazonaws.com/static.cart...f1ec108cf9.jpg Any other odd electrical gremlins of late (hazards are a separate 'circuit' than turn and work independently from ignition switch.) PS - Find another errrrr a reliable shop who will diagnose the problem and not just have you throw $ at parts recklessly... |
turn signals not working
It's all the lights. No indicator on the dash. Hazards work as there should. No other electrical gremlins. I talked to a mechanic who felt it was the hazard switch, even though the hazards work. I will explore that option. BTW if you don't have a T30 torx to remove the airbag, a 3/16s straight blade screwdriver will work.
|
All times are GMT -8. The time now is 12:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website