986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   Where to locate switched +12V in the trunk area... (http://986forum.com/forums/boxster-general-discussions/67197-where-locate-switched-12v-trunk-area.html)

BRAN 06-18-2017 10:40 AM

Where to locate switched +12V in the trunk area...
 
...does anybody have a picture, showing the exact cable?
Books/descriptions help (me) only so much.
And it should be a safe, meaning cause no trouble due to a posi-tap.
Sounds like an easy task, but not for me :rolleyes:
Thanks for any help in advance. :cheers:

78F350 06-18-2017 07:13 PM

I installed a rear view camera in my '01 2.7 a while back. I got info from a couple places, but post 15 in this thread is one I remember:
http://986forum.com/forums/boxster-general-discussions/41634-stuck-my-voltmeter-where-wasnt-welcome.html
Quote:

Originally Posted by jsceash (Post 318985)
X59 Plug pin location 4 White plug next to ECU (left of ECU) Red wire blue stripe fairly heavy wire come from ignition relay and turns off about 30 seconds after ignition is off. Does not come from ECU so can't hurt ECU. It turns on a half dozen other relays. I'm using it to turn on power to my Accusump solenoid ( .6 Amp) for over a year with no ill effect. I installed a 1 Amp fuse link after the connection. It come from fuse block C fuse 1, 25AMP fuse supplied from 80 Amp fuse at distribution block near battery.

Here's a pic of my tap into the red wire with the blue stripe coming off of X59 plug:
https://c1.staticflickr.com/5/4216/3...4ac36f12_c.jpg

BRAN 06-19-2017 09:26 AM

Thank you, 78F350!
:cheers:
That was it, although my connector wiring layout seems a little different.
I "posi-tapped" a WIFI back-up cam (iOS/APPLE 6s Plus as a monitor) to it and it worked. I'll see if it causes any trouble ;)
http://986forum.com/forums/uploads02...1497892999.jpg

Nine8Six 06-19-2017 09:44 AM

Quote:

Originally Posted by BRAN (Post 541277)
Thank you, 78F350!
:cheers:
That was it, although my connector wiring layout seems a little different.
I "posi-tapped" a WIFI back-up cam (iOS/APPLE 6s Plus as a monitor) to it and it worked. I'll see if it causes any trouble ;)

Good info, thanks Bran & 78F350 :cheers:

Something tells me I'll need that wire soon too


All times are GMT -8. The time now is 08:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website