Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-20-2017, 01:19 PM   #1
Registered User
 
pidj's Avatar
 
Join Date: Feb 2017
Location: Acton, ON
Posts: 257
Offsets ... ?

Hi I have a 986 S with 18" wheels and I'm at a loss trying to understand wheel offsets, etc. All I want to do is push the wheels out so the tire edge is closer in line with the fender and the car looks more aggressive in stance. I don't want to compromise the handling or the wear and safety of it's original engineering. How do you determine what is used ( a spacer?) and how much and how does the offset play into that?

Thanks!

__________________
-------------------------------
2001 Boxster S, Guards Red
pidj is offline   Reply With Quote
Old 04-20-2017, 01:59 PM   #2
Registered User
 
The Radium King's Avatar
 
Join Date: Apr 2010
Location: Canada
Posts: 3,121
do you know the offsets of your current wheels? they will be stamped on your wheels. or, if oem, what wheels are they? what tire widths/sidewalls are you running?ride height? if we know that them we could advise the max spacer width that would work for you.

otherwise, offset is the distance the mounting face of the wheel is offset (+ or -, often called 'et'; ie an offset of 65ET) from the centre line of the wheel. OEM boxster wheel will have an offset of about -50 mm front and -50 mm rear. often the '-' is left out. a larger offset wheel (ie, a 996 narrow body wheel has rears in the -65 mm offset range) will move the wheel further inboard and risk contact with struts, parking brake cables, trailing arms, etc. a smaller offset (ie, a 964 wheel at -35 mm or so) risks contact with the fender. spacers can move a wheel out if it is too far in, but can't bring a wheel in that is too far out. the math is easy; wheel offset + spacer width = new offset. so, a 20 mm spacer on a 996 narrow body rear wheel at 65ET is -65 + 20 = -45. limits for a boxster is max -40 front and -40 rear. of course, tire width and height, aggressive camber, and ride height are all variables that can affect fit. if you are on oem wheels then you are looking for spacers in the 7 to 15 mm range.
The Radium King is offline   Reply With Quote
Old 04-20-2017, 02:20 PM   #3
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
I run 20 mm front and 15 mm rear spacers with factory wheels and offsets on my 04 S

be sure to get longer lug bolts or studs if you will be using spacers
for studs, you need 90 mm with a 20 mm spacer. Might be able to get away with a 75 mm with a 15mm spacer, depends on the stud. Most of the longer ones have an unthreaded space of around 15 mm at the end. For safety, an open end lug nut should have at least 15 mm of thread showing past the not
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 04-20-2017, 03:11 PM   #4
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,821
Lower number offsets (eg. 40) will push the wheel out. So a 50 offset with a 10 mm spacer will be like a 40 offset.
__________________
James now has: 2008 987S 6 speed
Crashed: 2010 987.2 pdk in speed yellow!
Sold to a cool racer chick: 2004 986 S
YouTube channel: the PORSCHE as seen by NewArt
www.youtube.com/channel/UCohdrH2xHTklM1thxk0KKOQ?
NewArt is offline   Reply With Quote
Old 04-20-2017, 03:27 PM   #5
Registered User
 
pidj's Avatar
 
Join Date: Feb 2017
Location: Acton, ON
Posts: 257
I'm running the stock upgrade 18" turbo twist wheels and tires.
pidj is offline   Reply With Quote
Old 04-20-2017, 03:38 PM   #6
Registered User
 
WillH's Avatar
 
Join Date: Feb 2015
Location: QC
Posts: 412

Just to add to your confusion...
WillH is offline   Reply With Quote
Old 04-20-2017, 03:44 PM   #7
Registered User
 
pidj's Avatar
 
Join Date: Feb 2017
Location: Acton, ON
Posts: 257
Okay. So the max spacer for the rear would be 10mm? Would doing that (adding a spacer) require an alignment as well? Would 10mm spacers have that aggressive stance?
pidj is offline   Reply With Quote
Old 04-20-2017, 03:52 PM   #8
Registered User
 
The Radium King's Avatar
 
Join Date: Apr 2010
Location: Canada
Posts: 3,121
sorry, oem boxster wheels are 'around' 50ET; some are 53, 57, etc., hence the variety of spacers available to push you out to 'around' 40. you should really check your wheels as the turbro twists can be 996 or 993 wheels and you may already have spacers on the rear and not know it.
The Radium King is offline   Reply With Quote
Old 04-20-2017, 04:35 PM   #9
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
I run 7x17 et55, 7.5 x 18 et50, and 8 x 17 et50 fronts with 20 mm spacers and 8.5 x17 et48, 9 x 17 et52 and 9 x 18 et52 rears with 15 mm spacers with out any clearance problems. I have also put the 20mm spacers on the rear without any issues.
Tire size fronts are 225/45-17, 235/45-17 and 225/40-18 with 255/40-17 and 265/35-18 rears

Front camber is -2.2 and rear is -2.5 on M030 ROW springs so its lowered around 15-20 mm

Don't know where RK got 40 offset as a limit. Wheel width factors in with offset as well

there are a bunch of wheel/offset calculators on the web you can compare dimensions with

Adding spacers pushes the outside edge out and the only issue could be fender clearance. . With my setup, its is not a problem
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"

Last edited by JayG; 04-20-2017 at 04:45 PM.
JayG is offline   Reply With Quote
Old 04-20-2017, 04:56 PM   #10
Registered User
 
Join Date: Aug 2005
Location: Sanford NC
Posts: 2,533
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit will show you the effect of offsets.
mikefocke is offline   Reply With Quote
Old 04-20-2017, 05:37 PM   #11
Registered User
 
The Radium King's Avatar
 
Join Date: Apr 2010
Location: Canada
Posts: 3,121
i'm basing my -40 max on this ...

http://986forum.com/forums/general-discussions/65583-wheel-fitment-question.html

with max wheel width and max tire width (first post is a pic of a 275 tire on a 10" wheel at -34 offset). bit more room on the front (i am at -38 currently on an 8.5 w 235's) but really camber and ride height dependent.

edit to add that it becomes part of the math - if your wheel is a 9" (ie, an inch narrower than mine) then you can add 1/2" = 12 or 15 mm to my max offset. if you are on a 265, then you are 10 mm narrower than me, so you can add 5 mm to the offset.

Last edited by The Radium King; 04-20-2017 at 05:51 PM.
The Radium King is offline   Reply With Quote
Old 04-21-2017, 02:01 AM   #12
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
I run a 9" wide rear with a 20mm spacer bringing the ET down to around 35, sits dead flush with the arch.
That986 is offline   Reply With Quote
Old 04-21-2017, 03:35 AM   #13
Registered User
 
pidj's Avatar
 
Join Date: Feb 2017
Location: Acton, ON
Posts: 257
Does the ET value tell you the width of the wheel? Obviously, I'm not removing the tire to measure and I'm getting the impression that there are different sizes of 18" Turbo Twist stock wheels?
__________________
-------------------------------
2001 Boxster S, Guards Red
pidj is offline   Reply With Quote
Old 04-21-2017, 03:53 AM   #14
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
Quote:
Originally Posted by pidj View Post
Does the ET value tell you the width of the wheel? Obviously, I'm not removing the tire to measure and I'm getting the impression that there are different sizes of 18" Turbo Twist stock wheels?
ET is the offset of the wheel, width is different. It's the combination of the 2 which determine how far a wheel sticks out.

"The offset of a wheel is the distance from its hub mounting surface to the centerline of the wheel."


Last edited by That986; 04-21-2017 at 03:57 AM.
That986 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page