Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

LinkBack Thread Tools Display Modes
Old 08-10-2016, 06:50 PM   #1
Registered User
Join Date: Oct 2015
Location: Scituate MA
Posts: 831
Spring question

As discussed, I got one of my stock springs out and matched it against the the lowering spring I got. Seem to be the same height. Is that normal? H&R lowering springs.

DWBOX2000 is offline   Reply With Quote
Old 08-10-2016, 10:24 PM   #2
Registered User
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
I wouldn't say it's not necessarily conclusive. If they were both linear rate springs, and you knew one had a lower ride height than the other, then you could make an inference about their relative spring rates based on this data. However, as at least the stock springs are progressive rate (and very good chance, the aftermarket "lowering" springs are also progressive, but perhaps with very different progressive characteristics), there really isn't much about the effective spring rate (under load) from your observed data.

There are also significantly different versions of springs in the rear for tiptronic cars than manual transmission cars, due to the significant weight difference back there. I would guess the tiptronic rear springs would have taller free-length than for the manual transmission cars. I don't know if aftermarket offers different springs for these different applications or not, but mismatching the rear springs for the wrong application of stock springs can significantly affect the rear ride height, and I can't imagine aftermarket springs behaving any differently. Just something to be aware of.

2001 Boxster

Last edited by jakeru; 08-10-2016 at 10:28 PM.
jakeru is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -8. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page