986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   Short sunday drive - Mobius camera test (http://986forum.com/forums/boxster-general-discussions/62153-short-sunday-drive-mobius-camera-test.html)

steved0x 06-27-2016 12:04 PM

Short sunday drive - Mobius camera test
 
I got a Mobius camera to record my driving, and took it out for a quick test yesterday to shake it down before my next track day (whenever that is, I don't have any on the schedule right now...)

I also have a $10 eBay camera facing backwards, I am going to use it to see what happens behind me at the track and to get a different perspective. Also to see what it looks like when I pass cars :)

$10 eBay Camera (I found on Amazon as well)
https://www.amazon.com/gp/product/B009NC0N8K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Mobius:
https://www.amazon.com/gp/product/B00GPUEOVK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

It is the standard angle lens (not wide angle) and I had it set for 1920x1080 30 FPS with Narrow FOV.

Some issues:
  • Audio sensitivity is too high. I had to play with the audio settings in Camtasia to eliminate a lot of the noise. I'm looking to see if I can reduce the gain in the Mobius (edit: turns out I can't so looking at other solutions, there is some reference of opening the case and putting in a piece of foam to dampen the wind noise and that may help. I had my windows up except when I went under the overpass.)
  • Hopefully that crackling sound is the mic being overdriven by wind noise? Anyone with a Mobius, do you ever hear any noise like that?
  • Vibration: I have Wevo SS Transmission mounts that cause a lot of vibration, especially at idle. I need to see if I can reduce that transferring into the camera.
  • I have the Mobius aimed a little too high - I may add a tiny bubble level to the sleeve to help me get a repeatable setting.
  • I have the LN Engineering Skid plate for the deep sump. It adds a lot of "metallic" type noise. Once I get going it is not really audible but at idle and lower speeds, you can hear it sometimes... It got better once I got new transmission mounts but it is still present...

https://www.youtube.com/watch?v=7C6EFKLEyCw

<iframe width="560" height="315" src="https://www.youtube.com/embed/7C6EFKLEyCw" frameborder="0" allowfullscreen></iframe>

My spoiler is up because I recently installed a spoiler decal and this is my first drive since then.

http://986forum.com/forums/uploads02...1466722301.jpg


All times are GMT -8. The time now is 07:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website