01-18-2016, 12:43 AM
|
#1
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
HomeLink Install
Well removing the Dash to repair the melted wire I decided to take advantage and dye everything. It made me think.. I saw someone make their own using a factory button, but haven't seen anyone use an original HomeLink Garage Door Opener. If you don't know what it is, HomeLink is still being installed in cars today as universal garage door openers. Since around 00 i believe. My old DSMs had them, well the high end ones had them and all I had were built motor AWD massive turbo toys, I never used that stuff. And sometimes I removed them from the cars just because a sun visor isn't needed in a legit race car. Well what do you know, I still had one laying around.
This is the HomeLink unit extracted from the visor.
It only requires 12v constant or switched if you don't want the opener to work without a key. I'm not sure if it has memory to handle a switched source, but I can find out soon with my new house.
The cover comes off, and I'm sure you can get creative on where to install one. The button panel inside the black box is on a ribbon cable so modifying the box to fit this sucker somewhere nice Like the batwing should be easy.
I am unsure where I'm going to put mine but it will look as OEM as I can get it. I will update this post when I move along with it.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 05:26 AM
|
#2
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,794
|
There are a few DIY threads on this..
You can connect the wires to a switch on the horseshoe easily
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
01-18-2016, 05:36 AM
|
#3
|
Registered User
Join Date: Feb 2006
Location: Virginia
Posts: 1,710
|
Here''s a write up on Renntech:
http://www.renntech.org/forums/tutorials/article/153-yet-another-way-to-add-a-homelink-device/
You need to be a contributing member to access it. This method use a Targa Shade switch from a 996 to activate the Homelink. The icon on the switch looks similar to a garage door. The instructions show how to tie it into the regular dash illumination so that it illuminates and dims along with the rest of the controls. I think it has the best "OEM" look of any of the methods. (I suppose OEM is a misnomer since the 986 did not have a Homelink option.) The downside is that you can only use activate 2 devices instead of the three supported by Homelink.
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 997 adaptive sports seats, Litronics, silver console
Last edited by KevinH1990; 01-18-2016 at 05:42 AM.
|
|
|
01-18-2016, 05:40 AM
|
#4
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,723
|
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
01-18-2016, 11:23 AM
|
#5
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Quote:
Originally Posted by JayG
There are a few DIY threads on this..
You can connect the wires to a switch on the horseshoe easily
|
Using HomeLink... I've seen diy threads showing how to mod the actual garage door to be functioned by a oem switch. But not the HomeLink units.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 11:31 AM
|
#6
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,794
|
Quote:
Originally Posted by DarkStar
Using HomeLink... I've seen diy threads showing how to mod the actual garage door to be functioned by a oem switch. But not the HomeLink units.
Sent from my SM-G925T using Tapatalk
|
The process is the same
Connect a dash switch to the unit
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
01-18-2016, 11:34 AM
|
#7
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Quote:
Originally Posted by JayG
The process is the same
Connect a dash switch to the unit
|
Oh I wouldn't want that. I'd rather use the HomeLink buttons. Plus I have no extra spots for those huge buttons. Would onlu need to cut a small square in the plastic where it's going and install. The button cover will snap it together and look much better since that's what it was designed for.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 11:59 AM
|
#8
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,723
|
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
01-18-2016, 12:03 PM
|
#9
|
Registered User
Join Date: Nov 2006
Location: In the garage...
Posts: 1,708
|
Been a loooong loooong time since I did (Boxster has been gone ~ 7 years or so...) but I used an OE homelink box for a custom install in batwing (unit was from a mirror set-up in a Cadillac - so buttons on short side of box):
Congrats on your DIY
__________________
"Cool Prius!" - Nobody
|
|
|
01-18-2016, 01:04 PM
|
#10
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,794
|
Quote:
Originally Posted by DarkStar
Oh I wouldn't want that. I'd rather use the HomeLink buttons. Plus I have no extra spots for those huge buttons. Would onlu need to cut a small square in the plastic where it's going and install. The button cover will snap it together and look much better since that's what it was designed for.
Sent from my SM-G925T using Tapatalk
|
you have no empty switch positions on the horseshoe?
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
01-18-2016, 01:14 PM
|
#11
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
I have 0 switches on the Horseshoe. They were all removed for the Tablet. Glassed and molded and waiting for carbon fiber. The lock and defrost switch is in the batwing and soon a turbo timer is going in the middle of that.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 01:16 PM
|
#12
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Quote:
Originally Posted by Burg Boxster
Been a loooong loooong time since I did (Boxster has been gone ~ 7 years or so...) but I used an OE homelink box for a custom install in batwing (unit was from a mirror set-up in a Cadillac - so buttons on short side of box):
Congrats on your DIY
|
That is what's up. Did your HomeLink cone with an antenna or did you add that? Mine is made for the visor so I expect that it has an internal wire on the board. I've already pulled it apart to look, was thinking about the batwing just like that but not sure of how much range there would be.
I might just do that if I can cut the batwing well enough. I'm afraid to cut and screw up.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 01:18 PM
|
#13
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Here's the one from the Eclipse
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 01:45 PM
|
#14
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,794
|
I put the homelink I am using behind the batwing and it works fine
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
01-18-2016, 02:45 PM
|
#15
|
Registered User
Join Date: Nov 2006
Location: In the garage...
Posts: 1,708
|
Quote:
Originally Posted by DarkStar
That is what's up. Did your HomeLink cone with an antenna or did you add that? Mine is made for the visor so I expect that it has an internal wire on the board. I've already pulled it apart to look, was thinking about the batwing just like that but not sure of how much range there would be.
I might just do that if I can cut the batwing well enough. I'm afraid to cut and screw up.
Sent from my SM-G925T using Tapatalk
|
Antenna was attached to board... most likely yours is too. Range was fine... a bit better if antenna is facing up but not a big worry. If range is not adaquate enough there is an easy hack using aluminum foil if you need or run antenna wire to a-pillar (in phase of course).
Beige(ish) cover you have is an excellent template to cut batwing... grind/cut out a few fins from backside first then use a dremel and make each oval button hole and indicator light. The first one is the toughest but replacement batwings (back then as I too was worried) were ~ $7-8. Wire unit off of phone module taped to floor.
Good luck
__________________
"Cool Prius!" - Nobody
|
|
|
01-18-2016, 04:18 PM
|
#16
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Have you tried a switched power? As I mentioned I wasn't sure if it would retain the memory after power is cut? In the Eclipse it's powered constant. But might be safe to have it switched so when the car isn't on the HomeLink can't be accessed. I sometimes leave car unlocked In the driveway
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-18-2016, 05:07 PM
|
#17
|
Registered User
Join Date: Sep 2008
Location: Agoura Hills (LA) So.Cal.
Posts: 1,574
|
I searched the web and found a lot of posting on this. One of the best was on the Rennlist 996 forum. The switch used is a 996 Targa Shade Switch, Part No. 996 613 119 10 A05.
On 986 Boxsters these switches will only fit in the bat wing with cut outs (Part No. 996 552 335 02 01C), or the console if you don't have heated seats. I had two blanks on the left side of the radio but unlike the 996 switches, the 986 are slanted and side specific.
I had to flip the one on the right so it would fit properly. It appears the bump on the switch has to be on the outside for them to seat properly. This makes sense as all of the other switches are set up this way.
I lost the "Boxster S" script that was on the OEM bat wing and will work on a suitable substitute.
Here is a link to the Rennlist posting I used. Skip some of the posting as there are some typical internet bantering.
Garage Door Opener Hack/Mod - Rennlist Discussion Forums
__________________
1995 Porsche C4 Cab
2016 BMW M2, 6 Speed LBB - ED 7/2016
1997 993 Cab - Sold; 1997 993 Turbo - Sold
2001 Boxster S - Original Owner - 30K Miles -SOLD
|
|
|
01-18-2016, 05:14 PM
|
#18
|
On the slippery slope
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,794
|
My homelink is on switched power and does not lose it's programming
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|
|
|
01-18-2016, 05:51 PM
|
#19
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
My batwing holds my door lock and rear defroster buttons.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
01-19-2016, 01:03 AM
|
#20
|
Registered User
Join Date: Jan 2014
Location: Albuquerque, NM
Posts: 503
|
Think I'm good to go... Holes aren't perfect.
Sent from my SM-G925T using Tapatalk
__________________
-Josh
2001 Porsche 986 Boxster RS2.7 Bi-Turbo
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:21 AM.
| |