I have no good pics but this is one that does show the pipe in the engine bay from underneath:

http://i70.photobucket.com/albums/i1...psvlcypedf.jpg

here's another that shows it on the inside of the engine bay. It should not run anywhere near the suspension on the outside.

http://i70.photobucket.com/albums/i1...pslaesxzlt.jpg

Thanks, appreciate the assist. Since I am changing out the master and slave cylinder tomorrow, might as well correct this problem.

Changed out MAF, throttle body, Idle air control valve, plugs and coils and this is the result (see attached cut and paste please)

https://youtu.be/b3EUB0dkTlg sorry about the door alarm sound!

I've looked for hoses that might have come loose when changing out the throttle body, all appear to be tight. Only saw a film of oil on the intakes to the throttle body. I can hear a loud sucking (HISSSSS) sound for the few seconds the car does run. Is this a possible O2 sensor issue? How do I check to see if the sensors are still good? Any assistance would be appreciated.