HVAC Control Relocation for Double Din install?

[jaykay]

Okay, Geof thanks very much.

I would be interested in your gauge set up

I will post the interferences I am encountering. They may be hard to photograph but I will give it a go.

Different approaches can be taken; I think I am going to Dremel relieve the console in certain places.

For the radio to go in the top slot, two corner sections have to be whittled away a bit so that the metal frame does not catch.

For the Hvac controller, the top bearing pads interfere with a lip inside the lower slot; planning to channel that out enough to allow full insertion