Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 03-11-2014, 01:33 PM   #1
Registered User
 
Join Date: May 2013
Location: Central Illinois
Posts: 344
Remove gas pedal - help needed

Trying to replace the carpet in a 99 base. Old carpet was cut at top to fit around pedal. New carpet is not, and though I could cut it, appears that should not be necessary. How do you loosen (remove) the gas pedal assembly from the floor board?

I found one screw at the top, next to the cable, which was long enough to go all the way to the floorboard, but the pedal assembly is still not loose.

Would appreciate your help. Thanks, Joe

Xcellr8 is offline   Reply With Quote
Old 03-11-2014, 01:41 PM   #2
Registered User
 
Join Date: May 2013
Location: Central Illinois
Posts: 344
Answered my own question. That is the only screw. Once removed, the pedal assembly can slide up along the floorboard pedal mount to release a plastic clip built into the back of the pedal assembly. Be careful not to break the plastic clip. Keep the assembly close to the floorboard pedal mount until the clip is free.

Hope this helps the next one doing carpet replacement.

Take care,
Joe

Xcellr8 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page