Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-09-2014, 01:44 PM   #1
I am my own mechanic....
 
Timco's Avatar
 
Join Date: Feb 2013
Location: Salt Lake City, UT
Posts: 3,433
Repair notes...

Squeaky rear brakes. Pads look almost new in thickness. Never squeaked until new rear rotors.

Finally pulled them. I could see my reflection in two and all 4 had grooves and scratches the shape of the rotor.

Used 120 grit on my palm sander and kept the pad perfectly flat on the sander and took them down until perfect matte finish.

Silent.



__________________
'04 Boxster S 50 Jahre 550 Spyder Anniversary Special Edition, 851 of 1953, 6-sp, IMS/RMS, GT Metallic silver, cocoa brown leather SOLD to member Broken Linkage.
'08 VW Touareg T-3 wife's car
'13 F150 Super Crew long bed 4x4 w/ Ego Boost
Timco is offline   Reply With Quote
Old 03-09-2014, 02:04 PM   #2
Registered User
 
Gforrest2's Avatar
 
Join Date: Jul 2010
Location: Pacific Northwest
Posts: 308
Good info. Just changed pads and rotors on my kids RSX. He's complaining about squeaking. Will give this a try.
__________________
Glen
Gforrest2 is offline   Reply With Quote
Old 03-10-2014, 06:12 AM   #3
Registered User
 
Benjamin's Avatar
 
Join Date: May 2012
Location: Kalamazoo, MI
Posts: 149
Garage
You do realize that there is a break-in procedure for new rotors and/or pads, right? Each manufacturer is slightly different, but they all have them.

For instance, Hawk recommends:

"After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph. Do not allow the vehicle to come to a complete stop.When completed with this process, park the vehicle and allow the brakes to cool completely before driving on them again. Do not engage the parking brake until after this cooling process is compete"
__________________
2000 986 S - "The Black Widow"
Benjamin is offline   Reply With Quote
Old 03-10-2014, 11:33 AM   #4
I am my own mechanic....
 
Timco's Avatar
 
Join Date: Feb 2013
Location: Salt Lake City, UT
Posts: 3,433
Quote:
Originally Posted by Benjamin View Post
You do realize that there is a break-in procedure for new rotors and/or pads, right? Each manufacturer is slightly different, but they all have them.

For instance, Hawk recommends:

"After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph. Do not allow the vehicle to come to a complete stop.When completed with this process, park the vehicle and allow the brakes to cool completely before driving on them again. Do not engage the parking brake until after this cooling process is compete"
I followed something similar to this. My issue was new rear rotors with existing but near new pads. The rotors had some painted surface. This has totally reset the pads.
__________________
'04 Boxster S 50 Jahre 550 Spyder Anniversary Special Edition, 851 of 1953, 6-sp, IMS/RMS, GT Metallic silver, cocoa brown leather SOLD to member Broken Linkage.
'08 VW Touareg T-3 wife's car
'13 F150 Super Crew long bed 4x4 w/ Ego Boost
Timco is offline   Reply With Quote
Old 03-10-2014, 12:14 PM   #5
Registered User
 
rp17's Avatar
 
Join Date: Apr 2011
Location: DFW
Posts: 713
Quote:
Originally Posted by Timco View Post
I followed something similar to this. My issue was new rear rotors with existing but near new pads. The rotors had some painted surface. This has totally reset the pads.
Your solution appeared to work which is good. But I was about to mention the same procedure as above. What was the similar procedure that you did that didn't work? Just curious
__________________
What we're dealing with here is a complete lack of respect for the law.
rp17 is offline   Reply With Quote
Old 03-12-2014, 04:38 AM   #6
I am my own mechanic....
 
Timco's Avatar
 
Join Date: Feb 2013
Location: Salt Lake City, UT
Posts: 3,433
Quote:
Originally Posted by rp17 View Post
Your solution appeared to work which is good. But I was about to mention the same procedure as above. What was the similar procedure that you did that didn't work? Just curious
I did pads and front rotors a year and a half ago. I think there was a slip of paper with the pads, TRW.

The rear rotors were about a year later. Paper that came with those says new pads must be used but my pads were still very new in thickness. No break in instructions. It was used pads on new rotors that made it squeak bad. Every stop. Resurface has made them silent.
__________________
'04 Boxster S 50 Jahre 550 Spyder Anniversary Special Edition, 851 of 1953, 6-sp, IMS/RMS, GT Metallic silver, cocoa brown leather SOLD to member Broken Linkage.
'08 VW Touareg T-3 wife's car
'13 F150 Super Crew long bed 4x4 w/ Ego Boost
Timco is offline   Reply With Quote
Old 03-12-2014, 06:41 AM   #7
Registered User
 
jb92563's Avatar
 
Join Date: Apr 2012
Location: Riverside, CA
Posts: 1,665
A Team Porsche Race driver from the 70's told me that they would slip sandpaper between the discs and rotor and do a lap to "resurface" the rotors if they were giving less than optimal performance.

__________________
"It broke because it wants to be Upgraded "
2012 Porsche Performance Driving School - SanDiego region
2001 Boxster S, Top Speed muffler, (Fred's) Mini Morimotto Projectors, Tarret UDP,
Short Shifter, Touch Screen Dual Din Radio, 03 4 Bow glass Top (DD & Auto-X since May 17,2012)
jb92563 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page