Body trim adjustment

[southernstar]

Its not a trim piece, but the clamshell that appears to be out of alignment. I've never had to play with mine so I can't help you on that. Wat the car in an accident previously?

[Bryan topping]

The clamshell is fine, it sits flush all the way around. The corresponding small piece on the right side sits perfect but the left sits a bit high. I will try to get some better pictures posted.

[jaykay]

It looks like the clamshell "tips" are stopping too far down. You adjust the stops underneath a few clicks at a time until the shell is level. You may want tips a hair below the "tab" piece so that you don't get them whistling in the airstream.

The stops look like black plastic strips underneath the shell tips. As I recall you slide and click them to raise or lower the stop position. You can get to them with the shell up in service position

One day I had some garage time and started fiddling...sorry I can't refer you to a manual peocedure

[Brockmeister]

Time to get the hammer out!

[Bryan topping]

that was my first thought too but figured to go careful in case I broke something as expensive as an anatomical appendage