04-19-2013, 11:35 PM
|
#1
|
Registered User
Join Date: Aug 2012
Location: Denver, Colorado
Posts: 138
|
DIY shifter boot, and ghetto de-amber with pics!
So My shift boot was MANKY! so looking around the prices were all stupid for just a piece of pleather, so i took that SOB out and put in my own.
1. remove shift boot and knob (no tools needed)
2. rip all the seams, thus getting you both templates
3. select cloth (took all of my control to keep it black, since i love me some custom)
4. sew it (sewing machine, woman folk might be useful for some)
5. glue and tie knob to new boot
6. install
(honestly took under 30 minutes, super simple)
here you see the old boot up top ripped apart to make templates, one cut out and one about to be cut out.
super easy mod, and voila! you can make the boot as tight or baggy as you want, i like the baggy look myself...
Going to paint center console/upgrade knob in next project...
Besides adding clear side markers, I VHT nightshaded my amber on the ole headlights cause the orange was awful. It is a bit "tuner-ish" but until i get new lights this will be 100% better than amber every where!
1. clean
2. wet sand
3. alcohol clean
4. tape off
5. paint
6. clear coat
7. wetsand/ polish
here is a before, to reference
all comments, questions, and mockery is appreciated
Edit: yes sry its not all waxed, shiny and clean
SC
__________________
Stop lights timed for 30 MPH, are also timed for 60 and 90 MPH!
Last edited by ccstud17; 04-20-2013 at 12:21 AM.
|
|
|
04-19-2013, 11:52 PM
|
#2
|
Registered User
Join Date: Aug 2012
Location: Denver, Colorado
Posts: 138
|
Also, has anyone bought color matched paint in spray cans online? paintscratch.com seems to have a decent Porsche selection but I want the best!
thanks
__________________
Stop lights timed for 30 MPH, are also timed for 60 and 90 MPH!
|
|
|
04-20-2013, 04:40 AM
|
#3
|
Registered User
Join Date: Oct 2012
Location: Wake Forest, NC
Posts: 867
|
I've used paint from automotivetouchup.com with good results.
__________________
2000 Boxster S, 6 speed, Sport Package, Litronics, LED tail lights, LNE IMS-B, OBC, Skybreaker wind deflector, Arctic Silver/Graphite Grey
|
|
|
04-20-2013, 05:02 AM
|
#4
|
Registered User
Join Date: Oct 2007
Location: Midwest
Posts: 1,746
|
Nice job on the leather. I started to do the same with a different type of P-Car and had trouble sourcing the same shade of grey leather, stumbled into a guy who sold me his unused boot in the right color so I never did any sewing.
Question: Do you need an industrial grade sewing machine to stitch the leather? When I asked my wife about sewing the leather several months back she baulked at doing it saying the leather may be too thick for her machine.
|
|
|
04-20-2013, 05:06 AM
|
#5
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,163
|
Could you post a more straight on pic of the boot template? Maybe some measurements, too?
I've been scouring the local thrift stores for some white leather so that I can make a white boot and cover a few trim pieces in my all black interior, but would like to keep the old boot intact as its in great shape.
Love some DIY ingenuity
__________________
https://youtube.com/@UnwindTimeVintageWatchMuseum
|
|
|
04-20-2013, 05:18 AM
|
#6
|
Registered User
Join Date: Jun 2012
Location: Frederick MD
Posts: 658
|
Quote:
Originally Posted by particlewave
Could you post a more straight on pic of the boot template? Maybe some measurements, too?
I've been scouring the local thrift stores for some white leather so that I can make a white boot and cover a few trim pieces in my all black interior, but would like to keep the old boot intact as its in great shape.
Love some DIY ingenuity
|
Ask the eBay seller in the link below to make you one... They are doing a custom ebrake for me in black and red...
1997 2004 Porsche Boxster 986 Real Leather Shift Boot Yellow Stitching | eBay
|
|
|
04-20-2013, 08:39 AM
|
#7
|
Usercpy
Join Date: Aug 2012
Posts: 205
|
1. remove shift boot and knob (no tools needed)
can you tell me how to remove the knobs....
Thanks
__________________
http://www.flickr.com/photos/flickr_ching/
|
|
|
04-20-2013, 09:00 AM
|
#8
|
Registered User
Join Date: Nov 2009
Location: Winnipeg MB
Posts: 2,486
|
First pry loose the base being careful not to break the little plastic tabs. Then grab the knob with both hands and pull really hard. Make sure you don't clop yourself in the nose when it comes loose.
__________________
'99 black 986
Last edited by Mark_T; 04-20-2013 at 09:03 AM.
|
|
|
04-20-2013, 10:03 AM
|
#9
|
Registered User
Join Date: Mar 2013
Location: Tucson, AZ
Posts: 71
|
How well do the turn signal lights shine through the blacked out lenses? I'm considering the same thing myself but it's not worth it if it's a safety hazard from people not being able to see your front turn signal.
|
|
|
04-20-2013, 10:13 AM
|
#10
|
Registered User
Join Date: Aug 2012
Location: Denver, Colorado
Posts: 138
|
Coreseller: I had to use a leather needle, and go a bit slower it can always be done by hand.
Particle: I ll get you one by tonight, You could use that ebay link, or try a fabric store, they normally have all kinds of colors of leather.
Ilikeching: use a flat blade to pop the bottom of the boot up, then pull straight up while twisting on the knob! its a big yank, but the twisting made it much easier!
If anyone really doesnt have the means to make one, I'll make you one. I live in a rather country oriented town so we have all kinds of leather shops to source from. PM me
__________________
Stop lights timed for 30 MPH, are also timed for 60 and 90 MPH!
Last edited by ccstud17; 04-20-2013 at 10:16 AM.
|
|
|
04-20-2013, 10:22 AM
|
#11
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,163
|
Don't sweat it...I pulled my shifter boot off to take a look and it seems pretty straight forward.
Thanks
__________________
https://youtube.com/@UnwindTimeVintageWatchMuseum
|
|
|
04-20-2013, 04:54 PM
|
#12
|
Usercpy
Join Date: Aug 2012
Posts: 205
|
Ah, thanks...
__________________
http://www.flickr.com/photos/flickr_ching/
|
|
|
04-20-2013, 04:58 PM
|
#13
|
Registered User
Join Date: Dec 2009
Location: Toronto, Canada
Posts: 190
|
It is so easy to pull the shift knob off, I did it in the middle of an autocross once. I guess I was a little too agressive in my shifting LOL
|
|
|
04-20-2013, 07:57 PM
|
#14
|
Registered User
Join Date: Mar 2012
Location: Arizona
Posts: 720
|
That leather with yellow stitching that was linked looks like so much win. And for only $20. I wonder if I can find the airbag covers for the doors in leather with yellow stitching (hint hint)
|
|
|
04-21-2013, 02:45 AM
|
#15
|
Rennzenn
Join Date: Feb 2005
Location: Virginia
Posts: 1,369
|
The secret's out! I sourced my leather from a $5 thrift store coat...had enough to cover the door-armrests, too.
|
|
|
04-21-2013, 04:42 AM
|
#16
|
Registered User
Join Date: Jun 2012
Location: Frederick MD
Posts: 658
|
Quote:
Originally Posted by Crono0001
That leather with yellow stitching that was linked looks like so much win. And for only $20. I wonder if I can find the airbag covers for the doors in leather with yellow stitching (hint hint)
|
Ask them. They agreed to do my ebrake handle after me local shop begged of. I've not gotten it in yet, but the console cover the did looks good.
Last edited by shadrach74; 04-21-2013 at 04:47 AM.
|
|
|
04-21-2013, 04:43 AM
|
#17
|
Registered User
Join Date: Jun 2012
Location: Frederick MD
Posts: 658
|
Delete.........
Last edited by shadrach74; 04-21-2013 at 04:48 AM.
|
|
|
04-21-2013, 08:03 PM
|
#18
|
Registered User
Join Date: Aug 2012
Location: Denver, Colorado
Posts: 138
|
Ive thought of re doing all of my leathers kinda like you shadrach, really makes the interior pop!
Jfro: that is AWESOME!!! should have done it with a fur coat lol
__________________
Stop lights timed for 30 MPH, are also timed for 60 and 90 MPH!
|
|
|
04-21-2013, 08:16 PM
|
#19
|
Registered User
Join Date: Jan 2013
Posts: 560
|
Quote:
Originally Posted by j.fro
The secret's out! I sourced my leather from a $5 thrift store coat...had enough to cover the door-armrests, too.
|
Thrift store? Did someone say "thrift store"?
MACKLEMORE & RYAN LEWIS - THRIFT SHOP FEAT. WANZ (OFFICIAL VIDEO) - YouTube (worth is just for the Delorean shots)
__________________
2009 Porsche Boxster - Guards Red/Tan
Speed has never killed anyone, suddenly becoming stationary… that’s what gets you. – Jeremy Clarkson
|
|
|
04-21-2013, 10:20 PM
|
#20
|
Registered User
Join Date: Aug 2012
Location: Denver, Colorado
Posts: 138
|
"but hell it was 99 cents!"
__________________
Stop lights timed for 30 MPH, are also timed for 60 and 90 MPH!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 07:18 PM.
| |