Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-03-2013, 04:49 PM   #1
Registered User
 
kk2002s's Avatar
 
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
Garage
Also being from NJ and the cold we are currently seeing, there will be stiff shifting initially until everything warms up. Especially 1 to 2. I have 02 s w/56K. This would be the 6 speed. I think shifting at 2k is a bit low, even when things are cold. In the cold, I shift in the 2500 to 2700 range for the first several shifts, then move up around 3k. Once the mechanicals warm up, then boxsters shift so sweet well past 4k. Not sure about the Base motor but I feel that the 3.2 RPMs drop very quick during the shift cycle. If you take a long time to shift into the next gear, you will need to tap the gas to get the RPMs up to match. That is the dance between the gas and the clutch. I also agree that quick shifts make it so much smoother in the lower RPM shifts. Again cold weather makes initial shifting slow so this really only works when things are warmed up and more fluid. As has been said on many posts, Boxsters love to sing at high RPMs
__________________
2002 S - old school third pedal
Seal Grey
kk2002s is offline   Reply With Quote
Old 01-03-2013, 05:17 PM   #2
Registered User
 
Join Date: Jun 2012
Location: Frederick MD
Posts: 658
Try being faster with your shifts, as in move the stick and clutch faster. Many newbs focus so much on what they're doing that they never get past the mechanical movements into a more fluid motion; many let the revs drop too much on up shifts and not enough or too much on down shifts.

If you're in an S model it will be even more difficult to master, as the gear ratios are not evenly spaced; the lower gears are taller ratios and the uppers are relatively close ratio, beig ~600 rpm apart...

Do not feel bad, I've driven non synchro trannies that were easier to drive smoothly than my S. I do however find that my smoothest shifts are my most aggressive.

Like others, I suspect that my engine mount has gone "TU" and is big part of the problem... I just bought a Schnell short shift kit and a new engine mount. When its all in place, if it's 70% as good as the 6spd in my GF's MCS, I'll be happy. Right now it feels completely unrefined compared to the Mini/BMW product, and that's after I put a solid flywheel in the MCS...that's saying something.

EDIT- I see while I was typing this on my tablet (takes a while), others rang in with the same advice...so there must be something to faster and more fluid...

Last edited by shadrach74; 01-03-2013 at 05:20 PM.
shadrach74 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page