986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   Tire sizing, what size do I need for a 99 Boxster? (http://986forum.com/forums/boxster-general-discussions/41685-tire-sizing-what-size-do-i-need-99-boxster.html)

psperan 12-11-2012 07:11 AM

Tire sizing, what size do I need for a 99 Boxster?
 
I'm looking a t a set of 19" wheels to put on my 99 Boxster and need a little help. The size on the car are the factory 17" wheels 205/50/17 Front and 255/40/17 rear with the factory width. The new wheels I'm looking at are 19x8 for the front and 19x10 for the rear both with a 50mm offset. What size tires would I need to purchase? Also would the tires stick out past the wheel wells with these rim widths and offset?

Ghostrider 310 12-11-2012 07:57 AM

With 98 & 99 models using 19" was discouraged, later models had more reinforcement, hence the usage. I have read about people using 19" on 98's without issue, maybe Mr. Danger will assist you, he's like the guru of offsets and fitments, many famous people have sought his council...

jcb986 12-11-2012 11:56 AM

I wear 8 1/2 B width.

psperan 12-11-2012 12:28 PM

Ghostrider - thanks for the info, hopefully Mr Danger will chime in:D

JCB - Looks good!!! I want a look that fills up the entire wheel well and is flush with the car which looks like you achieved.

shadrach74 12-11-2012 04:22 PM

Quote:

Originally Posted by psperan (Post 319476)
Ghostrider - thanks for the info, hopefully Mr Danger will chime in:D

JCB - Looks good!!! I want a look that fills up the entire wheel well and is flush with the car which looks like you achieved.

I personally think that tires that would work on the rims you've specified are too big and would present too much rolling mass for a 200hp engine. Your car may look better with fatter/larger OD wheels and tires, but I think it will drive worse...and I don't mean in a subjective sort of way; I mean in a measured, performance by numbers kind of way.

Ghostrider 310 12-11-2012 04:26 PM

shadrach the mind reader, I was thinking the same thing. If you are going for a look IMO, it would be better to make the wheel wells look fuller with a PSS9 suspension which will lower the car a bit. That way, you get the look and sharper handling.

jcb986 12-12-2012 06:02 AM

Quote:

Originally Posted by psperan (Post 319476)
Ghostrider - thanks for the info, hopefully Mr Danger will chime in:D

JCB - Looks good!!! I want a look that fills up the entire wheel well and is flush with the car which looks like you achieved.

They are the stock 18" Turbos that came with they car. Now mine is an S model with the sport suspension...not sure if they will clear the fender so somebody will need to ring on what they have purchased for their base models.:cheers:

pk2 12-12-2012 08:19 AM

18's worked perfect for me, think 9.5" in back with plenty of room for 25mm spacers to. Any bigger I thing I' be loosing fillings.

Regards, PK

b-raddetail 12-13-2012 10:05 AM

On my old 98 I used to run 235/35/19 front and 265/30/19 rear. No problems at all.

shadrach74 12-13-2012 06:12 PM

Quote:

Originally Posted by Ghostrider 310 (Post 319491)
shadrach the mind reader, I was thinking the same thing. If you are going for a look IMO, it would be better to make the wheel wells look fuller with a PSS9 suspension which will lower the car a bit. That way, you get the look and sharper handling.

Great minds think alike...:cheers:

More 12-13-2012 07:27 PM

I have a set of 19" on my 1998 and they look and feel perfect.

http://986forum.com/forums/uploads01...1355459151.jpg

You can buy them here...

19 inch Aftermarket Porsche Boxster / 911 Wheels on eBay!

:cheers:


All times are GMT -8. The time now is 04:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website