10-20-2005, 10:59 PM
|
#1
|
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Hi,
An equally effective cleaner, but much cheaper is Toluene. You can buy this at any Paint Store for under $5/gal.
Add about 6 oz. when you fill up and you'll never have clogged injectors. It has the added benefit of upping the Octane rating as much as .5 points.
BTW, Toluene is a normal additive in many gasolines and is used as an Octane Booster, so there's no incompatibility issue whatever. Techron is merely Chevron's Trade Name for Light Aromatic Solvent Naphtha. Hope this helps...
Happy Motoring!...Jim'99
Last edited by MNBoxster; 10-21-2005 at 08:35 AM.
|
|
|
10-21-2005, 05:25 AM
|
#2
|
|
Registered User
Join Date: Sep 2005
Location: SE USA
Posts: 36
|
Quote:
|
Originally Posted by MNBoxster
Hi,
An equally effective cleaner, but much cheaper is Toluene. You can buy this at any Paint Store for under $5/gal.
Add about 6 oz. when you fill up and you'll never have clogged injectors. It has the added benefit of upping the Octane rating as much as .5 points.
BTW, Toluene is a normal additive in many gasolines and is used as an Octane Booster, so there's no incompatibility issue whatever. BTW, techron is merely Chevron's Trade Name for Light Aromatic Solvent Naphtha. Hope this helps...
Happy Motoring!...Jim'99
|
+1 on the Toluene...been using it for years with excellent results.
|
|
|
11-16-2005, 02:38 PM
|
#3
|
|
Registered User
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
|
Here is an article on toluene. Pros/Cons and what it does.
http://www.elektro.com/~audi/audi/toluene.html
If I just emptied a tank that had 91 Octane(highest availble in Sacramento region) with Chevron Fuel System Cleaner in it would I be ok to put in toluene when I fill up?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
|
|
|
11-16-2005, 03:08 PM
|
#4
|
|
Guest
|
Blinkwatt, I think you should use Jim's advise and add about 6 ounces (1 cup is 8 ounces as a reference) of Toulene at fill up's as a fuel injector/system cleaner.
If you want to boost your octane, you'll need to add more. They gave good advice in the Q&A in the article that you referenced.
|
|
|
|
11-16-2005, 03:54 PM
|
#5
|
|
Registered User
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
|
Could the boost that the toluene affect the catalayic converter in any way?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
|
|
|
11-16-2005, 04:02 PM
|
#6
|
|
Guest
|
Quote:
|
Originally Posted by blinkwatt
Could the boost that the toluene affect the catalayic converter in any way?
|
There is really no benefit to exceed the octane rating of the car's requirement. I think it's 93 right? So, no need to exceed the 93, since there is no benefit. Stay around 93 octane, and the cats will be happy too!
Blinkwatt, did the Chevron Fuel System improve your car's performance any; MPG's, ease of starting, or acceleration??
|
|
|
|
11-16-2005, 04:12 PM
|
#7
|
|
Registered User
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
|
THe idling of the car is more consistent at start up. Thats all that stood out.
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
|
|
|
11-16-2005, 09:10 PM
|
#8
|
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Quote:
|
Originally Posted by blinkwatt
Could the boost that the toluene affect the catalayic converter in any way?
|
Hi,
Toluene is a normal ingredient in many (read Most) Gasolines. It is used as an Octane Booster, so in concentrations under say 10%, there would be no ill effects to the Cat. Hope this helps...
Happy Motoring!...Jim'99
|
|
|
11-16-2005, 09:20 PM
|
#9
|
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Hi,
Don't make the mistake of equating Octane with Power. High Octane Gasoline does not necessarilty have any more power, in fact, depending on the Octane Boosting Agent used, it could actually have less Power. Adding Ethanol to Gasoline will boost the Octane Properties and Rating, but Ethanol contains about 8% less energy than gasoline, so a Tankful containing 10% Ethanol will actually contain less energy than a tankful of non-Ethanol laced Gasoline.
Octane Rating is a measure of the Fuel's resistance to compression related Spontaneous Combustion. Using it may allow your engine to extract more Power from the Fuel it uses, but the Fuel doesn't contain any more Power.
As stated, it's useless to use Fuels with a Higher Octane Rating than spec'd by the Manufacturer. The Boxster is spec'd at 93 Octane, but can go as low as 90 Octane, the ECU (DME in Porsche Parlance) will compensate, but power will be slightly diminished by the retarding of the spark. Hope this helps...
Happy Motoring!... Jim'99
|
|
|
11-17-2005, 09:16 AM
|
#10
|
|
Registered User
Join Date: Jun 2005
Location: USA!!
Posts: 1,159
|
I just use Chevron w/ Techron always in the 928. No additives necessary. The wife will put other gas in the Boxster and I do have to use a cleaner (Lucas injector cleaner) about once every 6 months to keep hers clean.
Quote:
|
Originally Posted by MNBoxster
Don't make the mistake of equating Octane with Power. High Octane Gasoline does not necessarilty have any more power, in fact, depending on the Octane Boosting Agent used, it could actually have less Power.
|
Thanks Jim for pointing out the biggest misconception about octane. Most people (including myself until about a year ago) equate high octane with explosive power, but it's the opposite. The higher the octane, the lower the volatility. That's why you generally get better gas mileage from higher octane gas....if the car is made for that higher octane.
Quote:
|
Originally Posted by blinkwatt
Could the boost that the toluene affect the catalayic converter in any way?
|
Toluone in effect "waters down" the gas to make it higher octane, so I think it would be the opposite (lower octane being the problem), and not affect the cats, but could harm the O2 sensors. Lower octane gases combust at lower compression, so in the Boxster they would combust early, sometimes before the spark and before all of the gas has been injected into the cylinder. The problem is when gasoline combusts early, not all of it burns so you have gas rolling down the cats and into the O2 sensors. That creates a cat fire risk and is the reason the manual says not to let the car sit and idle/warm up. The computer will adjust for it, but it's not optimal for the Boxster and it can only adjust so far. If you've chipped it, the computer does not adjust for lower octane gas.
Conversely, if you raise the octane too high, then the compression may not be high enough to ignite the gas efficiently when the spark occurs. At that point, you're just wasting your money since really high octane gas is mucho $$$ and you're not gaining anything from it.
__________________
1987 928S4 Silver Metallic (980)/Navy (TP) 5-Speed
2000 Boxster Speed Yellow/Black 5-Speed
1966 Wife White/Brown Top
1986 Daughter White/Brown Top (Sold!)
1992 Daughter White/Blonde Top
|
|
|
01-28-2006, 07:40 AM
|
#11
|
|
Guest
|
Quote:
|
Originally Posted by MNBoxster
Hi,
An equally effective cleaner, but much cheaper is Toluene. You can buy this at any Paint Store for under $5/gal.
Add about 6 oz. when you fill up and you'll never have clogged injectors. It has the added benefit of upping the Octane rating as much as .5 points.
BTW, Toluene is a normal additive in many gasolines and is used as an Octane Booster, so there's no incompatibility issue whatever. Techron is merely Chevron's Trade Name for Light Aromatic Solvent Naphtha. Hope this helps...
Happy Motoring!...Jim'99
|
FYI.
Per Jim's advice, I purchased a gallon of Toluene today, to be used as my routine fuel cleaner. It was $16.26 (Ace Hardware) for a gallon- good for 21 fill-ups.
Not as cheap as Jim thought, but still a ton cheaper than the stuff in the "fuel cleaner" aisle at the auto parts store. That stuff is about $4 for a 12 gallon tank treatment.
|
|
|
|
01-28-2006, 08:59 AM
|
#12
|
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Quote:
|
Originally Posted by bmussatti
FYI.
Per Jim's advice, I purchased a gallon of Toluene today, to be used as my routine fuel cleaner. It was $16.26 (Ace Hardware) for a gallon- good for 21 fill-ups.
Not as cheap as Jim thought, but still a ton cheaper than the stuff in the "fuel cleaner" aisle at the auto parts store. That stuff is about $4 for a 12 gallon tank treatment.
|
Hi,
Yea, I have to admit, it's been a while since I bought any at a Paint Supply. I was just at Menard's the other day and noticed that Toluene had Spiked to about $12/gal., still, if you buy in those nice, little, pre-packaged 6 oz. cans, you're gonna be paying somewhere between $85 and $115 for that same gallon of Toluene...
Happy Motoring!... Jim'99
|
|
|
01-28-2006, 09:14 AM
|
#13
|
|
Guest
|
Quote:
|
Originally Posted by MNBoxster
Hi,
Yea, I have to admit, it's been a while since I bought any at a Paint Supply. I was just at Menard's the other day and noticed that Toluene had Spiked to about $12/gal., still, if you buy in those nice, little, pre-packaged 6 oz. cans, you're gonna be paying somewhere between $85 and $115 for that same gallon of Toluene...
Happy Motoring!... Jim'99
|
Hey Jim, thanks again for the tip! I tried buying it from the paint store (a good one too!) and they did not have it. I was surprised.
|
|
|
|
02-18-2006, 11:09 AM
|
#14
|
|
Guest
|
What would be a good way to accurately measure the 6 ounces of toluene, and then more importantly, dispense into the car without getting any all over the place?
|
|
|
|
02-18-2006, 12:26 PM
|
#15
|
|
Registered User
Join Date: Mar 2005
Location: socal
Posts: 82
|
a used bottle of techron? (and a funnel to fill the techron bottle)
Last edited by bhduxbury; 02-18-2006 at 02:05 PM.
|
|
|
02-18-2006, 12:50 PM
|
#16
|
|
Registered User
Join Date: Aug 2005
Location: USA
Posts: 150
|
I'm a bit confused, as usual.
Is there any particular “name brand” of toluene that I should be looking for or do I simply ask my hardware store clerk for “a gallon of your best toluene please?”
Also, I am looking for clarification of the recommended amount. The way it is recommended in a previous post seems vague to me. Sometimes I fill up from a half tank, other times I might be running on fumes before I gas up. Do I add 6 oz. every time no matter how much gasoline I need with which to fill up? The 987 Box’s fuel capacity is 16.9 gals. according to the manual. When it is recommended that we
“add about 6 oz. when you fill up and you'll never have clogged injectors,”
is that the same as saying 1 oz of toluene for every 2.8166 gals. of gasoline or rounding it up 1 oz of toluene for every 3 gals of gasoline? Would that be the proper ratio to get the job done and not hurt the system in any way?
I am not trying to nit pick here, I just don’t want to screw up a good (and expensive) car by not understanding and following the recommendation exactly. Thanks.
__________________
Zib
|
|
|
02-19-2006, 07:41 AM
|
#17
|
|
Guest
|
hi
here the unleaded is 95 and super unleaded 98 so does this means that their is more cleaners or solvent in them?
how come a world company car recommends different petroleum for the same car depending on where it is driven, 98 is NOT recommended here by the way and 95 should be used for the Boxster
|
|
|
|
02-19-2006, 07:59 AM
|
#18
|
|
Registered User
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
|
Quote:
|
Originally Posted by olly986
hi
here the unleaded is 95 and super unleaded 98 so does this means that their is more cleaners or solvent in them?
how come a world company car recommends different petroleum for the same car depending on where it is driven, 98 is NOT recommended here by the way and 95 should be used for the Boxster
|
The octane rating is NOT related to the amount of cleaning agents in the gas. Chevron regular grade (say 87) has techron in it while the Costco premium does not.
I would guess the diff octane reqs listed are in response to diff regulations around gas that pop up in diff countries or in the case of the US, diff states.
__________________
Rich Belloff
|
|
|
02-19-2006, 08:12 AM
|
#19
|
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Quote:
|
Originally Posted by olly986
hi
here the unleaded is 95 and super unleaded 98 so does this means that their is more cleaners or solvent in them?
how come a world company car recommends different petroleum for the same car depending on where it is driven, 98 is NOT recommended here by the way and 95 should be used for the Boxster
|
Hi,
European Gasoline is both more highly refined (better end-product, more waste) and rated under a different system than US Gas. As stated, the additive package varies by Brand and local Gov't. Regulations...
Happy Motoring!... Jim'99
|
|
|
02-19-2006, 01:39 PM
|
#20
|
|
Registered User
Join Date: Jun 2005
Location: Blacksburg, VA
Posts: 49
|
Not much of a writer so apologies in advance.
There have been a few great/interesting posts on gasoline the last few weeks. Thought I would add my dime. Some of these threads mix apples, oranges, and bananas. This thread started as a discussion of fuel injector cleaners the cheaper of which are mostly kerosene (90%) with some fuel additive. The better fuel cleaner additives (e.g. techron concentrate and there are others) are usually formulated for engine/intake valve/combustion chamber cleaning as well as injectors. The better cleaners are more complex and cost a bit more. (Are they worth it? The better ones work as advertised. Techron gasolines regularly get praise from auto manufacturers, mechanics, and auto magazines for their cleaning properties.) These cleaners may increase octane but are not usually designed to do so (kerosene would actually decrease octane.) Similarly octane additives are designed to increase octane. They may have some cleaning ability but not much. So if you need/want to use a cleaner buy and use a cleaner (note: Chevron says if you consistently use their techron flavors you should not need to use an additional cleaner. FWIW their concentrate is about 10 times the amount of techron in a typical tank of their gas.) Different grades of gasoline are not always just the same old gasoline with different cleaning and octane additives. The larger more recognized companies may specifically formulate grades to get a “better gasoline” then add additives to get the octane rating and cleaning properties. However, since gasoline is a blend of long chain carbohydrates, as stated before the overall energy content is not going to vary significantly from one gallon to the next regular, mid-grade, or premium.
1. The problem with using other than premium fuel in our cars has been discussed in a few posts. All of the analysis is correct but a key point has been missed. When less than hi-test is used, the car runs with the tuning for the manufacturer’s recommended gasoline grade. It will maintain this tuning until it senses a problem – pinging or knocking – then the DME (computer) will retard timing to get the pinging to cease. Eventually the pinging will stop and the computer will advance timing to its normal set point. The problem is two fold: (1) You may never realize you car was starting to knock and will continue driving as if there is no issue since the DME corrected it and (2) You are relying on a protective function to keep your engine safe – a protective function that starts when the problem it attempts to stop is actually occurring. OBTW – this change in timing will show up in both power (if you could measure it) and gas mileage. Quite simply, engines perform best when using fuel with the octane rating they were designed and tuned for. If your non Boxster says regular is ok, using premium gets you nothing. However, if premium is recommended it will prevent knocking and protect you engine. (Historical note: Early internal combustion engines ran on gasoline with octane numbers between 60 and 70. Mechanical break down due to excessive knock was the leading cause of engine failure.) Finally, knocking can occur whenever the engine is under load -- accelerating, going up hill, starting from a standstill, etc. It is very difficult to control your driving to avoid knocking at all times.
2. Grades of gases will mix. Specific gravity is only a part of the equation that allows two liquids to mix or be miscible. For example, water does not mix with gas but will mix with rubbing (isopropyl) alcohol which will mix with gas. So we frequently use isopropyl alcohol (or ethanol) as the main ingredient in dry gas. They will not mix immediately but after a short time they are a blend. OBTW the octane of the mix is approximately equal to the volumetric octane average. (i.e. ½ tank of 89 plus ½ tank of 93 yields about 91 octane). Think about it, if the major difference in gasoline grades is their additives, how do we mix the additives with the gas. Moreover, how do you get the injector cleaners or octane boosters you add later to mix?
3. All gas is piped from the same refineries to the same tank farms and sold to different gasoline stations. In some cases, the same truck will serve several different gas chains in an area. However, the storage tanks at the station are all different, with different maintenance and cleanliness standards. Although these tanks are inspected, it is not as often or thorough an inspection as you might think. More often than not it is a safety/pollution inspection. There is a difference in gas companies, it is the stowage tanks at the station.
4. Techron is added to gasoline (Chevron/Texaco/and a few others – Citgo has their own blend as does Sunoco) primarily as a cleaning agent (and it is a pretty good one.) It helps to increase octane but it is not added as an octane booster. Techron Concentrate is designed as a cleaner not an octane booster. While it has 5 to 10% toluene/aromatics its primary ingredients are patented combinations of polyether amines about 85% or so for cleaning. Toluene is added to gasoline to increase octane – not act as a solvent/cleaner – because it is a solvent (think paint thinner) it does clean but it is less effective than commercial cleaners. There are two other problems with using toluene: (1) the purity/quality of paint thinner grade toluene is not always the greatest. (2) Toluene (and xylene) are two of the most common octane boosters (note: I did not say cleaners) added to gasoline. They lower the volatility of the gasoline and thus increase the octane. However, this causes a problem in the winter. Thus ethers are added to maintain volatility and in the winter … the ether content is increased and toluene content decreased. Some countries, Australia for example sell several blends of gasoline throughout the year -- think a monthly blend. In the US we have winter, summer and in some cases intermediate gas so adding toluene in the winter will change that mix. Adding toluene will increase your octane content; however, it is not a great cleaner and in the winter may not be what you want to do. But I must emphasize toluene is not the primary or active ingredient in techron as stated elsewhere. Final OBTW, many injector cleaner manufacturers (and mechanics) recommend addition the next to last fill up before an oil change. There is some sound engineering thought behind this. Although it may be unnecessary, it may be a good idea.
5. There was considerable discussion about the relation between octane and fuel energy that is about 3/4 right and misses another key point. First, if the only difference between grades was the octane additives. They would have about the same energy per gallon; maybe a bit less energy per gallon due to the volume of the octane additives but not much. However, octane simply makes the fuel burn less easily. The energy is released based on the breaking of chemical bonds in the fuel -- so energy content can be increased by increasing chemical bonds (carbon bonds are the primary ones of concern for gasoline) although it will still be less volatile. For some premium fuels (not all), the gasoline is formulated differently to maintain or in some cases increase the energy content. It is not just adding octane boosters and cleaners. Second, Higher compression gasoline engines are (in general) more efficient at extracting energy from gasoline. Higher compression gasoline engines require higher octane (less volatile) gasoline to run and avoid pre-ignition. The system, engine and gasoline, is designed to extract more power from the fuel. The gasoline is not more powerful but more energy can be converted due to the increased efficiency of the engine. In general this shows up as an increase in the engines power output.
Hope this helps.
ATB,
Tom
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 04:47 AM.
| |