Rear Bumpers
How can you bring the rear bumpers (flat black) back to life or can they be painted to match the color of the car.
|
Do a search, some people here have painted them...you basically do a lot of prep sanding, sanding more, and sanding more, spraying an adhesion spray, then primer, then paint, then clearcoat and wet sand.
Or... go to BumperPlugs.com |
Use back to black from your local car accessory store to bring the black original color back or visit bumperplugs.com who sell colors options...
Good luck. |
BTW you want to search for "painted bumperettes" here... and probably also in DIY section...
here's a link to a 6speed article.. I haven't done any of this myself..yet... DIY color match bumperette - 6speedonline.com Forums |
I did it. Didn't do all the steps that the guy did in the link above, i.e., wet sanding after clearcoat, but mine came out okay.
My thread here: http://986forum.com/forums/general-discussions/30418-4-hours-$50-later.html |
All times are GMT -8. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website