First, I installed new rear speaker brackets from Euro Motorspeed. I inquired wether or not they would sell me just the brackets from their kit. I spoke with Loi and two days later they arrived! I have to say, the brackets are excellent quality! When I replaced the stock speakers with 3.5" Pioneer speakers, I enlarged the holes in the stock plastic bracket and to be honest, I just was not happy with the way it looked, even if I am the only one who saw it. The Euro Motorspeed brackets are metal and fit perfectly. If you are contemplating replacing your stock speakers, this is the way to go IMO.
You can see the difference between modified stock and the new one:
Next I installed the SkyBreaker from Fred! I used a fuse tap to power it. Again, excellent craftsmanship from Fred
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
Pulled front bumper and cleaned all debri. I could not believe the crap that gets in there. Our vents are like a big vac cleaner, pulled cig butts and tumble weeds and plain dust dirt. Even between the radiator and condensor there was crap and alot of it. To further protect filtration I fabbed these up from rain gutter plastic. they come 6in wide by about 6ft. IT took me about 45 min to do. Less than $5 a roll of this stuff so very cost effective. Cut out cardboard shape then trace over to mesh. I fastened to hoirzontal grids with bobby pins! Step back ten feet and it passes my visual. be sure to blow out the radiators with compressed air too.
Pulled front bumper and cleaned all debri. I could not believe the crap that gets in there. Our vents are like a big vac cleaner, pulled cig butts and tumble weeds and plain dust dirt. Even between the radiator and condensor there was crap and alot of it. To further protect filtration I fabbed these up from rain gutter plastic. they come 6in wide by about 6ft. IT took me about 45 min to do. Less than $5 a roll of this stuff so very cost effective. Cut out cardboard shape then trace over to mesh. I fastened to hoirzontal grids with bobby pins! Step back ten feet and it passes my visual. be sure to blow out the radiators with compressed air too.
Beautiful! Well done!! this is next on my project list too!
__________________
2000 S - Borla Exhaust, TS Cat Deletes, RSS UDP, B&M Short Shift, T96 Steering Wheel, Potenza RE-71R's,
Mantis 2.0L Deep Sump, de-snorkeled, Bilstein PSS9 Coil-Overs, Rennline lug studs, and auto crossed regularly.
2001 Boxster S
Hybrid Mode
