Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-03-2012, 06:56 AM   #1
Registered User
 
Join Date: Oct 2006
Location: SoCAL
Posts: 238
Thanks for the link. I'll see what I can do. Which one is this, the 009 or 010 from VW?
seventythree is offline   Reply With Quote
Old 01-03-2012, 05:41 PM   #2
Registered User
 
Join Date: Mar 2011
Location: Seattle
Posts: 24
The -010 connector is a Female connector used in the dash. It is square. The outside dimension is 2.00mm ( .079 in) X 2.00mm (0.79in).
Length is 7.11mm (0.280in)
The -090 is a male connector used for the stalk. It is rectangular. The outside dimension is 1.87mm (0.073in) X 2.09mm (0.082in). Length 6.4mm (0.25in).
All measurements were made using a vernier caliper and 58 year old eyes, so no guarantee on their accuracy.
I used the link provided and searched the Molex catalog for over two hours before I gave up trying to find these @#$%! tiny connectors.
If someone can find them in the Molex catalog, the next question is how many thousand do you want/need? So then one has to go to the Mouser catalog and hope Mouser stocks them and they will sell you only a few.
Somethings make me wish I was working on a car made in Detroit.
Skeefy is offline   Reply With Quote
Old 01-03-2012, 11:01 PM   #3
Registered User
 
Join Date: Oct 2006
Location: SoCAL
Posts: 238
Skeefy,
Thanks for providing those measurements.

There is a lot of chatter on various boards about how 009 pins should be used on 2001- cars all the way around. Apparently, people are having a hard time inserting the 010 pins into the black connector housing that plugs into the dash on the later cars.
Now, the fact that you are calling the 009 a male connector is very puzzling to me.

As for sourcing these connectors, I was able to find the connectors that linklaw provided a link for above in the Mouser catalog, and it can be ordered in small quantities.

45750-1112 Molex Terminals
seventythree is offline   Reply With Quote
Old 01-04-2012, 08:34 PM   #4
Registered User
 
Join Date: Mar 2011
Location: Seattle
Posts: 24
I'm wrong about the -009 being a male connector. I was making that assumption by looking just at the -009. The opening in the end looked too small to be a female connector.
The -009 female connector fits the pins in my 2002 4 stalk assembly. I have not received the black plug socket, so I can't comment on how well -009 or -010 fit it. Since the -010 is rectangular and not square, maybe the difficulty people are having is due to the -010 being rotated 90 degrees? I'll repost after I get my black plug. It should be soon. It has been on order for two weeks. :dance:
Skeefy is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page