Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-02-2011, 07:23 AM   #1
Registered User
 
Join Date: Jul 2011
Location: UK
Posts: 6
Boxster wont start - Help pls ?

Really need and appreciate some advice. I have just bought my first Porsche a Boxster S 3.2 2002.

The initial issue was difficulty to start when Hot, but once it turned over a few times, it popped a bit, sometimes stalled, but on 2nd or 3rd hot turnover was ok and it never cut out whilst running.

Then the problem started to happen sometimes (not always) when it was cold.

The problem got worse until it started cutting out whilst driving and then I couldn't start at all now even when cold.

So obviously an intermittent fault - getting worse - initially when hot.

Now this bit may be a bad steer - but during all the the only code I got was P0134 which is bad o2 sensor so I replaced that. Turned the key and it fired !!! hey sorted...... er no !!! has now stopped again and wont start - so I think the o2 code may have been due to very bad fuel / air mix during turnover and no firing. And the initial start after install a lucky start. This does happen sporadically. When I removed the sensor I got a code to tell me this and once reinstalled the code cleared so happy this is installed ok. No OBD errors at present.

Now - lifted lid off engine and I can hear a high pitched tone - like the scream of a relay or solenoid when the coil is breaking down, whilst the car is sat with ignition on. occasionally I then get a chatter like a relay chattering when it has a loose connection or the coil is failing. This sounds as if it is coming from the throttle body area. Saying this when I push the accelerator I can hear the throttle move smoothly so I think fly by wire is ok?

Hence my conclusion is that there may be some actuator, solenoid or valve etc which is responsible for presetting throttle position which initially was failing when hot but is now failing most of the time. If I do get a lucky start, it tends to run for quite some time before giving me issue or cutting out. but if it does, its a hell to get going again.

Any experts on starting routing, throttle bodies etc

Help really appreciated?

Many Thanks

Clive
clivep078 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page