Car not starting

[ppbon]

... disconnect the two wires that plug into the clutch interphase microswitch and connect them together.
Now try the ignition again.
If you still have the problem I would then replace the ignition switch.
Instructions here: http://www.pedrosgarage.com/Site_3/Replace_Ignition_Switch.html

Happy Boxstering,
Pedro

[vigor]

Originally Posted by ppbon

... disconnect the two wires that plug into the clutch interphase microswitch and connect them together.
Now try the ignition again.
If you still have the problem I would then replace the ignition switch.
Instructions here: http://www.pedrosgarage.com/Site_3/Replace_Ignition_Switch.html

Happy Boxstering,
Pedro

Where do I find the clutch interpgase microswitch?

Thanks for the quick response!

Nevermind. Found this thread: http://www.renntech.org/forums/index.php?/topic/13249-boxster-clutch-interlock-switch/

Will try this and see if it works.

[vigor]

Originally Posted by ppbon

... disconnect the two wires that plug into the clutch interphase microswitch and connect them together.
Now try the ignition again.
If you still have the problem I would then replace the ignition switch.
Instructions here: http://www.pedrosgarage.com/Site_3/Replace_Ignition_Switch.html

Happy Boxstering,
Pedro

Tried that and didn't work.

The ignition switch seems to be turning fine. Would it still be a good idea to replace it? What else could it be?

[jcb986]

Boxster seem to have a poor ignition switch. Do what Pedro suggested