New owner 2003 Porsche Boxster S need help

[extanker]

ask JFP i think he answered someone about the selector shaft bushing leak,i think he said it wasnt an easy or cheap fix

[clickman]

I have an 01, but my understanding is that the 03/04 glass conv top goes into the maintenance position just the same way as all others, with plenty of access.

You might want to invest in a Bentley's manual - it's full of great info for the do-it-yourselfer.

I had a code for the secondary air a few months ago (P0410). I cleared it and it never came back. That's an emissions system and doesn't really affect your engine performance.

[JFP in PA]

While this is not an uncommon problem, the shift lever on the tail housing rides in a bronze bushing that is pressed into the tail housing. Unfortunately, that bushing is not available as a replacement part (it is actually machined in place during manufacture, making replacement impossible). When it wears and starts to leak, the trans will need to be removed and disassembled, and a new tail housing (read expensive) installed....................

[jmatta]

Sounds like a new design project for LN Engineering and another high mark for Porsche

[ucsbjones]

So do I live with a mild leak and buy the $12 oil pan? Or, can this lead to catastrophic failure while on the road?

Thanks in advance for any guidance.

Tom

Originally Posted by JFP in PA

While this is not an uncommon problem, the shift lever on the tail housing rides in a bronze bushing that is pressed into the tail housing. Unfortunately, that bushing is not available as a replacement part (it is actually machined in place during manufacture, making replacement impossible). When it wears and starts to leak, the trans will need to be removed and disassembled, and a new tail housing (read expensive) installed....................

[extanker]

depends on how big the leak is,if its a large puddle you will need to fix it,if a small spot just check the level once a year. heck i had an old truck in the 1950,s that leaked so bad i put 5 pounds of chassis grease in it and worked fine....dont try that with your po

[clickman]

Originally Posted by JFP in PA

While this is not an uncommon problem, the shift lever on the tail housing rides in a bronze bushing that is pressed into the tail housing. Unfortunately, that bushing is not available as a replacement part (it is actually machined in place during manufacture, making replacement impossible). When it wears and starts to leak, the trans will need to be removed and disassembled, and a new tail housing (read expensive) installed....................

Please tell me this is only an issue with the 6 speed, and we 5-spd guys are fine...