Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-04-2009, 04:26 AM   #1
Registered User
 
Join Date: Nov 2009
Location: Greenville SC
Posts: 85
I believe there is a post about unplugging MAF sensor and it says if it runs better without then replace it. I believe the post is by Mike Focke. I appologize if i missed the last name. I do not have the link but its out their and is good info!! See if you can find it. You may try cleaning the MAF but i would suggest replacing it if you are sure its the issue. You may try swapping o2 sensors first since its and easy task.
DamageINC123 is offline   Reply With Quote
Old 12-04-2009, 04:30 AM   #2
Registered User
 
Join Date: Nov 2009
Location: Greenville SC
Posts: 85
http://sites.google.com/site/mikefocke2/checkenginelightcausedbymassairflowsensor
DamageINC123 is offline   Reply With Quote
Old 12-04-2009, 09:48 AM   #3
Registered User
 
Join Date: Apr 2006
Location: nj
Posts: 389
Sounds like your MAF is likely shot, but that doesn't rule out the 02 sensors. Mike Focke's MAF step by step is superb.

One O2 sensor in my '02 S went at just 64k miles (got check engine light) when my brother owned the car; 60-75k isn't uncommon. I read in this forum that it's best to change all four at once, so I changed out the other 3 at 68k miles even though I wasn't getting any codes. BIG improvement in idle smoothness and driveability. With 74k miles, your O2 sensors are likely on the way out even if they're not flashing CELs.

You might want to try ************************************************************ for the MAF, as they seem to have the lowest price. They show OEM type O2 sensors for the '99 for $100.97, and the air mass sensor for $161.48 or $217.22, depending on the part number you require. I imagine these prices are far lower than what you can get them for in Glasgow.

It's possible to get universal O2 sensors without OEM type plugs for substantially less, but I'd recommend against that in your case because if the connections you make aren't just right you'll have problems. "Plug and play" is the safe bet for the inexperienced DIYer (like me). Even with 4 sensors the savings isn't worth it IMO.

Last edited by gschotland; 12-04-2009 at 02:27 PM.
gschotland is offline   Reply With Quote
Old 12-04-2009, 10:35 AM   #4
Registered User
 
Join Date: Apr 2006
Location: nj
Posts: 389
Another great one courtesy of Mike Focke. All about O2 sensors.

http://sites.google.com/site/mikefocke2/oxygensensors
gschotland is offline   Reply With Quote
Old 12-08-2009, 09:45 AM   #5
Registered User
 
Join Date: Nov 2009
Location: glasgow
Posts: 14
Hi,took out maf and cleaned it with electrical solution,car now going great,thanks everyone for there help.
golfglasgow is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page